20 Most Recent
1993 Subaru Loyale - Page 8 Questions & Answers
Is how to reset the system in a 2009 Subaru outback after ignition switch and key computer change dash lights are not working and fuel pumps not coming on
Resetting the system after an ignition switch and key computer change in a 2009 Subaru Outback may involve several steps. Here are some general steps that you can try:
**1. Check Fuses: Verify that all relevant fuses are intact. A blown fuse could be causing issues with the dash lights and fuel pump. Consult your vehicle's manual to locate the fuse box and check the appropriate fuses related to the dashboard and fuel pump.
**2. Security System Reset: Sometimes, a change in the ignition system can trigger the vehicle's security system. Try resetting the security system by locking and unlocking the doors using the key fob. If your vehicle has an immobilizer system, make sure the new key is programmed correctly.
**3. Battery Disconnect: Disconnect the vehicle's battery for about 15-30 minutes. This can help reset various systems in the car. After reconnecting the battery, start the car and check if the issues persist.
**4. ECU (Engine Control Unit) Reset: If the engine control unit was replaced or modified, you may need to perform an ECU reset. This typically involves disconnecting the battery, turning on the ignition (without starting the engine) for a few seconds, turning it off, and then reconnecting the battery.
**5. Reprogramming Keys: If new keys were added or the computer was changed, make sure that the new keys are programmed correctly to the vehicle's anti-theft system. Refer to your vehicle's manual or contact the dealership for guidance on key programming.
**6. Consult a Professional: If the issues persist after attempting these steps, it's advisable to consult a professional mechanic or contact the Subaru dealership for assistance. They may have specialized tools and knowledge to diagnose and address issues related to the ignition system and key computer.
Remember to exercise caution when working with electrical components in your vehicle, and if you're not comfortable performing these steps, seek assistance from a qualified mechanic or Subaru service center.
How do i open trunk on Subaru outback wagon without key or fob/remote
no year car told. the now lost free users guide is by year.made 1994 to present (even 1989 as legacy outback)no country told at allsorry cars not the same world wide.open glove box, read the users guide? oops locked too>?most cars sold in USA , called wagonsopening the rear gate hatch by accident drivingkids fall the ground, or cargo hits cars behind you. (so is illegall that feature)and is never called a truck ever, in a wagononly on sedans. a hatch or 5th door it is named.In Europe then even call them 5 door cars.so I am confused.so all keys lost to the car. and can not drive it nor open any side doorsand rear hatch is locked and valuables in cargo area to fetch, right?I say call a locksmithand pick the lock.the door lock(mechanism) in the hatch internal, is accessed from the inside of the hatch open.so no why to attack it that way.call a locksmith,
AT light flashing (check engine light on) upon start and with a cold engine on 1998 Subaru Forester that recently had head gasket changed.
USA SPEC, CAR? NO ENGINE TOLD. 2.5 LITERS?
TURBO ENGINE OR NOT (YES WAS AN OPTION)
IT HAS CAM TIMING BELT (IGNORED?) 60K MILE SERVICE POINT ( HISTORY OF SERVICE ?)MATTERS) MILES ON CAR ARE.?
ARE SPARK PLUGS AND FILTERS 25YEARS OLD?
COIL PACK 4 HV WIRES 25YEARS OLD IS FAIL.
WORKING WITH NO SCAN TOOL "OBD2"??????
WHAT ARE YOU ASKING FOR 100 GUESSES OR ASKING HOW TO DO THE TESTS, ALL TECHS DO TO FIND IT.??? WHAT IS THE REAL QUESTION?
THE 2 LAMPS GLOWING TELL YOU THE CAR NEEDS SERVICE AS THE GLOVE BOX USERS GUIDE TOLD CLEARLY.
CAR STARTS AND RUNS, DOES IT DRIVE ?PERFECTLY? ( SHIFTS ALL GEARS?) AND ENGINE HAS FULL; POWER? AND DOES NOT MISFIRE?
CEL GLOWS COLD BUT GOES OUT HOT NORMAL ENGINE, IS THAT THE IMPLICATION?
WHAT TO DO IS (DIY) ANSWERING NOW FOR DIY USA SPEC CARS. ONLY
1: CHECK ALL FUSES, SKIP NONE, CAB/BAY
2: SCAN THE PCM NEXT.
3:SPARK IS FROM 1 UNIFIED COIL PACK AND USES UNIQUE BOXER FIRING ORDER, IF CONNECTED WRONG (HV LUG) IT WILL MISFIRE HORRIDLY OR ENGINE STALLS.
1,3,2,4 ORDER ON PAN-CAKE BOXER ENGINE.
THE HEAD PULLER NEVER SEEN BOXERS BEFORE SURE.
SCAN TOOLS 101 "obd2 usa SPEC"
BUY ONE
RENT ONE
BARROW ONE,
GET IT SCANNED INA SHOP OR AT SOME AUTOSTORES THAT DO THAT .
NEVER SKIP THE SCAN OR GO BROKE GUE$$ING
MOST CARS THIS OLD 99% HAVE 10 THINGS WRONG. AND NEEDS LOTS OF TESTING TO FIND THEM ALL.
Subaru liberty 2012 boot won't look, could it be a fuse and how can I replace it please
If the boot of your 2012 Subaru Liberty is not locking, it could be due to a blown fuse. Here are the steps to check and replace the fuse:
- Locate the fuse box in your vehicle. The fuse box is usually located on the driver's side of the vehicle, under the dashboard.
- Open the fuse box and locate the fuse for the boot lock. The location and labeling of the fuse may vary depending on your vehicle model and year. Refer to your vehicle owner's manual for the specific fuse location and labeling.
- Check the fuse to see if it is blown. A blown fuse will have a broken wire inside or the fuse element will appear melted. If the fuse is intact, it may not be the cause of the problem.
- If the fuse is blown, replace it with a new one of the same amperage rating. You can find replacement fuses at most auto parts stores.
- Test the boot lock to see if it is working properly. If it still doesn't lock, there may be a different issue that requires further diagnosis by a mechanic.
Note: Always replace fuses with the same amperage rating as the original fuse. Using a fuse with a different rating can cause damage to the electrical system or create a fire hazard.
Trying to put a Clarion PF3494 into a 2001 Subaru Outback, but can't find ISO adapter for connectors on PF3494
It sounds like you are trying to install a Clarion PF3494 head unit into a 2001 Subaru Outback and you have run into compatibility issues. The Aerpro APP8CLA4 adapter you bought does not seem to fit your head unit.
In this situation, you have a few options:
- Look for a custom installation kit: Some car audio retailers offer custom installation kits specifically designed for your make and model of car. You may be able to find a kit that includes the necessary wiring harness and adapter for the Clarion PF3494.
- Check the Clarion website: Clarion may have information on their website about the wiring harness and adapter required for your specific head unit and vehicle.
- Contact a professional installer: A professional car audio installer may be able to help you find the correct wiring harness and adapter for your head unit and vehicle, or they may be able to custom build the necessary wiring for you.
I recommend contacting a professional installer if you do not feel confident wiring the plugs yourself, as incorrect wiring can cause damage to your head unit and vehicle.
If you can provide the specific information about the pins and connections of the Clarion PF3494, I may be able to assist you further.
How to change lqnguage of Eclipse AVN - ZO3IW
- To change the language of the Eclipse AVN-ZO3IW in-dash navigation system in your Subaru VX hybrid, you will need to follow these steps:
- Press the "Menu" button on the navigation system.
- Scroll through the menu options and select "System Settings."
- Scroll through the options and select "Language."
- Scroll through the list of available languages and select the language you want to use.
- Press the "OK" button to confirm your selection and save the changes.
- You may need to restart the navigation system for the changes to take effect. If you have any trouble completing these steps or if you have any other questions, you may want to consult the owner's manual or the manufacturer's customer support for further assistance.
Not finding what you are looking for?