20 Most Recent 1988 Chrysler LeBaron Questions & Answers


Check the speedo gear on the transmission for worn or flat teeth. Replace if necessary. You should lubricate the cable with lithium grease too.

1988 Chrysler... | Answered on Jun 27, 2017


When you first start the car can you hear the pump run? There is a fuse and/or relay located in engine compartment.

1988 Chrysler... | Answered on Apr 09, 2017


problem 1 check the motors side by side
if the operation and mounting is the same more than likely will
problem 2 put the hand brake on and start the car, place in gear if it idles ok then put your foot on the brake --if it plays up it is a vacuum leak in the brake booster
problem 3-- gm has a policy of not changing transmission oil
if the car has more than 100,000miles on it , I would suggest taking it to an accredited transmission specialist shop, have the bands and clutch packs adjusted and a transmission oil change done

1988 Chrysler... | Answered on Mar 06, 2017


Either your light bulbs are burned out, you have a wiring issue between the blinker switch collar and the rear lights (easy to check with a voltmeter or test light), or you have a bad brake light switch (again, easy to verify with voltmeter or test light), or a problem with the blinker switch collar (most likely).

1988 Chrysler... | Answered on May 21, 2015


try a drop tester i think you will find its failed ,yes it may show 12.something volts but it it has no amperage behind it

1988 Chrysler... | Answered on Apr 18, 2015


some mechanics remove the hose going to the cooler tank and run the engine at idle till oil stops running. I like to remove the oil pan, clean it and fit a new filter.

1988 Chrysler... | Answered on Feb 23, 2015


sounds like a defective vehicle speed sensor or some other electrical problem,bad connection to sensor.

1988 Chrysler... | Answered on Apr 08, 2014


.095 corner to corner middles then do corner to corner on inside corners after middle working self back to middle

1988 Chrysler... | Answered on Nov 09, 2013


Hi Darren,here's a link on your steering column removal,join the A.Z.site,become a member,it's free then you can use there repair guides,I use them alot,need more help,let me know.

1988 Chrysler... | Answered on Aug 07, 2013


Brake fluid is added to the master cylinder

1988 Chrysler... | Answered on Mar 26, 2013

Not finding what you are looking for?
Cars & Trucks Logo

116 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LeBaron Chrysler

  • LeBaron Chrysler

Most Popular Question

1988 chryler labaron cannot get pump

  • Cars & Trucks
Loading...