20 Most Recent
1994 Mercury Villager - Page 4 Questions & Answers
One under hood where
On the left (drivers) side of the vehicle to the left of the steering wheel, underneath by the brake pedal. There is a cover on it that needs to be removed to see the fuses. I hope this helps and good luck.
My car right side Head
IT IS THE RELAY IN THE BOX ON THE DRIVER SIDE INNER FENDER. GO TO VILLAGER-QUEST YAHOO GROUP FOR DETAILED HELP
Para q sirve el cruise cont. villager 1994
Sirve para que no tengas que "apretar el acelerador" cuando manejas en carretera a velocidad constante. para encenderlo aprieta el boton encima del switch de las luces y lo accionas con los controles del volante. Puedes acelerar, desacelerar y apagarlo, tambien se apaga cuando pisas el freno. Saludos
My 1994 villager starts, idles and revs fine After
Bad head gasket & the white smoke is coolant
The O2 Sensor see the coolant or water vapor
& then PCM adds fuel
So you got coolant & too much fuel out tailpipe
Do a Combustion Leak Test where you put a plastic
container over the radiator cap area & see if the
blue fluid turns yellow indicating exhaust in coolant
from head gasket
I have installed new front
Have the engine running & bleed the brakes again
Have someone in the vehicle slowly push the brake
pedal,never pump.
When you are driving, do you pump your brakes,NO
Pushing the brake pedal only moves the piston in the
brake cylinder about 1",that is all
That amount of movement will build up to 2,000 lbs
of pressure. So no pumping,does nothing
As the person is pushing the pedal down,someone
else opens & then closes the bleeder valves while the
pedal is still going down.
Then you wait on the person in the car to start over.
Real simple.
Assuming you paid for all that work,why do you have
issues that you didn't have before.
Don't want to discuss what the pros do,but we have
a thousand people on this site every day with problems
that they shouldn't have and are lighter in the wallet
Where is the water pump located? I had something
Your fan & pulley are bolted to the waterpump. You need to remove plastic fan schrod, then fan, pulley, belt then you will see waterpump bolted to front of engine. Stop by any good parts store, have them look up waterpump and show you what it looks like. Then you'll know what to look for.
Where do you put more
You add transmission fluid in the same location you remove the dipstick from to check the fluid level.
Not finding what you are looking for?