20 Most Recent 1989 Chrysler LeBaron - Page 2 Questions & Answers

The Fuel Pump Relay is located:Under hood, driver side, front side of strut tower, mounted on fenderwellApplication:Coupe and Convertible.The Fuel Pump Relay is located:Under hood, driver side, front side of strut tower, mounted on fenderwellApplication:Sedan

Does the fuel pump have power and ground ?

First, a no spark condition would either be a faulty ignition coil or a faulty distributor ignition pickup.The first thing you need to do is get spark back then if it will not start you will need to check the fuel pressure it should be 15 psi..

1992 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Serpentine Belt Diagram Alt., P.S., Idler & Tens.



More details you can find in DAYCO Catalog

I hope help you whit this (remember rated this help) Good weekend.

If the door won't open from the outside handle or the inside handle, you'll have to pull the door panel and check the latch.

Here's a link,the turbo part is toward the bottom of page.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528025169f

You should check if your Speedometer app need an update on the Android.or you should make a diagnostic, and if you need a tool you can click here : great tools

Have you checked the system for fault codes? If not go here for instructions on how to do that.

sign into autozone.com, after your signed up you can view repair manuals w/ diagrams an pictures you can print

disconnect plug at pump and put led test light across plug and check for a cicuit (using this method checks for power and earth circuits at same time) if there is a curcuit pump is shot,if no circiut you need to check to see which side is missing,no power check connections and fuses/relays,no earth check connections may be a kill switch aswell

There really isn't anything called a "RPM" sensor.

It is located on the top of the engine in the fuel rail that sits over and provides fuel to the fuel injectors. The regulator has a vacuum hose going to it. I have provided a picture of it below.

change the electrical switch on the back of the ignition switch as these fuses are powered from the ignition switch