20 Most Recent 1989 Chrysler LeBaron Questions & Answers

Check the tie rod, ball joints and bushes. Change what is bad. Do wheel balancing and alignment thereafter

1989 Chrysler... | Answered on Jan 19, 2018

Should be under the hood on the driver side near the firewall.
You can see in the attached video the rough location of the plug you need to hook up to, although its a slightly newer chrysler.
You can also try the key method used in the video.


1989 Chrysler... | Answered on Nov 30, 2016

Did you check your timing belt?

1989 Chrysler... | Answered on Jul 25, 2016

Chryslers solenoid is part of the starter, you can remove the starter and remove the solenoid to replace it or just replace the starter.

1989 Chrysler... | Answered on Apr 25, 2015

Be more specific
is the peddle very hard, or like a light spring and spongy
do the brakes feel normal but the car just seems to keep traveling???

1989 Chrysler... | Answered on Mar 24, 2015

you may have one of a few problems
1, a bad ignition switch
2, a bad start relay in the under the hood fuse box
3, bad ignition resister, mounted on fire wall
4, you may have a bad injector relay
5, poor engine ground
6, no power to the ECU, check fuses
7, a bad ECU

1989 Chrysler... | Answered on Mar 24, 2015

marks on crank and distributor shaft face each other and the two cam marks are parallel to valve cover surface on head, with flat surface on distributor body straight paralle with engine


1989 Chrysler... | Answered on Mar 24, 2015

Dennis , it's got to be with the motor. Go to the battery and follow the cables, one goes to the starter. Not trying to be smart about it. Good Luck

1989 Chrysler... | Answered on Nov 09, 2014

I have the same problem. I found the motor runs well but the contraption that's driven by the gear has disintegrated. Anyone know where to find one or what it's called? thanks

1989 Chrysler... | Answered on Nov 09, 2014

cause may be the coolant temperature sensor, it's signal is used by the computer to meter fuel to the injectors when the coolant sensor goes bad the car will be slow to start the first time and there will be a strong odor of gasoline , turn it off and it starts right up

1989 Chrysler... | Answered on Nov 07, 2014

Just push and then lift the clutch pedal toward you to adjust the cable. The mechanism is above the clutch pedal and is selfadjusting as liong as you lift the pedal. If that don't work then the adjust mechanism is junk.

1989 Chrysler... | Answered on May 03, 2014

combination of emissions controls and ignition control issues and mine which is a 91 does the same exact thing because the defrost controls cause the engine to rev up high then slow down.. I disconnected the ac compressor so it does not come on..mine has some vacuum issues that I have not corrected yet but as old and as many miles as is on it Im gonna leave it alone until the motor blows up ..it smokes now and has over 300,000 miles on it.. rebuilt twice..5 head gaskets..6 timing belts and even when its really cold outside, it will start up when all my neighbors' cars wont..funny as heck..

1989 Chrysler... | Answered on Dec 25, 2013

Not finding what you are looking for?
Cars & Trucks Logo

135 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LeBaron Chrysler

  • LeBaron Chrysler

Most Popular Question

obd 1989 lebaron d thanks

  • Cars & Trucks