20 Most Recent 1998 Chrysler Cirrus - Page 4 Questions & Answers

Most auto parts stores have a device to test modules.You would need a meter and a shop manual to do the test procedure on the car.

The transmission is in limp mode -- 2nd gear only -- this is a protection devise to prevent damage to the transmission when there is a failure -- could be as simple as low fluid or a speed sensor not working properly.. 70% of the time it is something internally wrong with the transmission

Pull the fuse out one at a time untill you frind the blowin fuse, There is no diagram for it evan in the owners manual, Showing you where they are locacated , They are numbered,

sounds like an internal transmission failure!

usually along the rocker drivers side however some models have them near the rear axle or carrier. follow the lines

a few cracks are ok a lot are not keep in mind if it breaks your walking

check the fuel pump relay. another possibility is the onboard computer. i have heard of several chrysler products having the PROM chip fail.

i cant get my data connection to work on my phone i click the button to turn it on says turning on and then it just doesnt work, which means i cant use my phone when im oout and about unless i am connected to a wi fi witch most the time i cant get wi fi when im out with friends can someone help me how to get it to work againMercedes Superchargers

some fuel pumps have a hose between pump and pump tower metal fuel line .Hose could split or come off if mount clamps come loose.

The PCM (Powertrain Control Module) is located in the left side of the engine compartment, beside the Power Distribution Center (PDC).Fig. 1: Location of the PCM on the Cirrus, Stratus, Sebring convertible and Breeze models Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using FixYa, have a nice day.

You let the car cool completely, then open the bottle with either coolant or a thermometer symbol on the cap. Poor the proper amount in and close it back up.

whats problem with switch