20 Most Recent 1994 Chrysler LeBaron Questions & Answers

There should be a lever in the back for manual

1994 Chrysler... | Answered on Dec 31, 2019

I really think you should go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it, parts info, wiring diagrams, electrical diagrams, fuse diagrams, error codes, etc everything

1994 Chrysler... | Answered on Mar 15, 2018

Filter is very likely but I would check the fluid level first.

1994 Chrysler... | Answered on Feb 13, 2018

Have the engine steam cleaned (watch any electronics) Run the engine & start looking from the top, down. It may be a bad valve cover leak from the rear of the cover or ck the front & rear seals. (cracked head, block etc. It could be many places

1994 Chrysler... | Answered on Oct 14, 2017

First I suggest to try and check fuse box.

1994 Chrysler... | Answered on Aug 25, 2017

It will be in the under hood fuse and relay center, check the owner's manual for exact position in box or check the lid for a diagram.

1994 Chrysler... | Answered on Jun 28, 2016

I don't know about download but you can buy an owners manual at Helms Auto Manuals 1 800 782 4356

1994 Chrysler... | Answered on Jun 25, 2016

Put the key in to start it... Mine reset when disconnecting battery and that's what I did...If not idk

1994 Chrysler... | Answered on Jun 25, 2016

first thing id do is to ceck the fuse. i know the switch checked out but thats the simlist solution. if its good then there are 2 motors on either side of the convertable top at the bottom. they might be hard to find but they will be behind some panels. just follow the top down and find which panels to remove. id say your motors are bad. i know it sounds weird that both could go out at the same time but i used to build convertable tops for the mitsubish spyders and ive seen them go bad after just 1 month. id unplug one of the motors and try to jump the connection to see if they are bad. if they are both in working order after that then id say you ave bad wiring somewhere from the switch.

1994 Chrysler... | Answered on Jun 25, 2016

for the best solution of your problem visit this site
Best Manuals

1994 Chrysler... | Answered on Apr 26, 2016

Well it could be the drive gear in the trans or the speedo in the dash.

1994 Chrysler... | Answered on Apr 07, 2016

It's probably the gauge it self that is bad , they do go bad . Does the vehicle run an shift good ? The vehicle speed sensor is an input to the transmission control module (computer) an the TCM is on the CCD data bus , so are other modules . Like the ECM - engine computer an what ever other modules your vehicle has . The TCM shares speed info with ECM , instrument cluster etc... So if the transmission shifts good an engine runs ok the VSS is good .

1994 Chrysler... | Answered on Apr 07, 2016

A switch somewhere is damaged. there's one on the door jam (where hinges are) but it can also be a short somewhere.
What I did is pull the bulbs out and bought one of those keychain flashlights and leave it on my seat as I only need a little light to see the keyhole. Most of the time I don't need any light as the street lights or the moon provide enough of it.

1994 Chrysler... | Answered on Feb 01, 2016

they either leak coolant or are noisy and wobbly.

1994 Chrysler... | Answered on Jul 22, 2015

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

348 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LeBaron Chrysler

  • LeBaron Chrysler

Most Popular Question

replaced speed sensor in 1994 lebaron

  • Cars & Trucks