20 Most Recent 2000 Isuzu Rodeo - Page 9 Questions & Answers

check the ignition timing is set at no1 piston tdc compression stroke as you may be 180 degrees out in the firing order

new brakes new car

code p1340 refers to ignition control module (ICM)-cylinder identification/ syncronization===causes--wiring--ignition coils--ICM---ECM Talk to the service dealer as to the most probable failed unit before you waste money

Many things. You need to retrieve the code. If you can still drive it, most autoparts stores will check the code for FREE. or you can buy a code reader that will tell you.

down on the bell housing or on the engine block at the bell housing. Just follow the line from the master cylinder and you will find it.

if the car is a auto matic start the car in park with the parking break on. under the hood you will see to dip sticks. one should be black "oil" the other yellow Transmission stick. with the car running pull the dip stick out wip off any oil on the stick. reinstall all the way pull it out again, you should have either 2 dots aproxmaintley 1" spread the top dot is where the trans mission fluied needs to be. if it is barley on the stick go to your local parts store ask what type of transmission it uses and buy a couple of quarts probley about 12.00 also get a tran. funnel to add the fluied. put a little at a time and check the stick untial it is on the top mark about2.5" from bottom of the stick. also if the fluied is not a redish color, have it changed. good luck

That means they were filled with steam instead of water and coolant. That would signify that not enough coolant was put in and that it had a vapour lock.

I did not hit the panic button on my vehicle, but my ac, windows and turn signals stopped working all together. You need a new alternator. And more joyful news, you might need a new battery as well. I had a Rodeo. It was wonderful. I shuttled my kids and husband around in it.