20 Most Recent 2006 Chrysler 300 Questions & Answers

the vehicle overheated and now no crank no start

2006 Chrysler... | Answered on Sep 18, 2020

This may be accompanied with the power door locks not working also. You may be able to reset it by pulling the fuses in the underhood fuse relay center. The fuse or fuses that may reset the system are sitting in special holders in the relay center that have little clips on the side.They will look different from the other fuses as they have their own little holders. Pull them up and reseat them. Hope this helps

2006 Chrysler... | Answered on Apr 04, 2019

It will need reprogrammed with a scan tool

2006 Chrysler... | Answered on Apr 04, 2019

You can try out some guide from here reliable-store they also provide live chat feature for instant help and it's very useful

2006 Chrysler... | Answered on Mar 12, 2019

Need color wire diagram to bypas the ignition transponder. I have the module and the chip key.

2006 Chrysler... | Answered on Dec 09, 2018

Definitely possible that your vehicle was secured incorrectly for towing.

2006 Chrysler... | Answered on Feb 15, 2018


2006 Chrysler... | Answered on Feb 09, 2018

Could be a switch, could be a motor, or could be a fuse. Fuse should be located inside of the interior fuse panel.

2006 Chrysler... | Answered on Feb 08, 2018

This is actually normal. There is a option in the menu on the dash to turn this off and on

2006 Chrysler... | Answered on Oct 25, 2017

if the shifter is on the column remove plastic cover there is a small metal bar that moves it needs some grease or wd 40 on it

2006 Chrysler... | Answered on Oct 24, 2017

If thermostat is ok then you could have an air lock in your radiator.
Possible water pump not working properly such as the impellor slipping..
Radiator may be partly plugged and not letting the fluid flow.
Are your belts tight enough so they do not slip. Your main belt lightener may not be working so when the engine speeds up it slips instead of working.

2006 Chrysler... | Answered on Oct 02, 2017

Hello 2006 Chrysler,

If your talking about the component that is located along the air duct run from the air filter to the throttle body it is caled a MAF sensor.
Mass Air Flow Sensors Components

2006 Chrysler... | Answered on Jul 23, 2017

Not finding what you are looking for?
2006 Chrysler 300 Logo

1,037 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

300 Chrysler

  • 300 Chrysler

Most Popular Question

chrysler 300 06 old pump new pump

  • Cars & Trucks