Top 20 2005 Chrysler Town & Country Questions & Answers

0helpful
1answer

2005 Chrysler Town and Country. Multiple electrical issues.

That sounds like a BCM or a communications issue. The only way to diagnose is by an auto electrician connecting a professional grade scan tool computer. There may also be DTC codes relating to the communication aspect of modules.. https://www.google.com/search?q=auto+electrician+near+me ..
8/3/2023 3:40:01 PM • 2005 Chrysler... • 45 views • 0 helpful votes
2helpful
2answers

2005 Chrysler Town & Country. My turn signal doesn't work on drivers side. Changed bulb, socket, and signal switch. The back signal works.

signal inside car on the dashboard goes fast. ?? in both RIGHT and LEFT turns. or just left, please be more clear on that. I guess driver means LEFT correctly please use left and right ! or tell if car is LHD or RHD??? we can not see the car. nor what country it resides at all. sorry can not. www world wide web here WE CAN NOT SEE YOUR CAR or read the VIN and go, gee it is in the UK or not. fast means error as the users guide tells. for sure, and is #1 clue this. 2005 cars are different that 1990s. vastly so. the hazards evidence is very useful; here it told you the bulbs are good. not shorted bulbs, not blown out and open bulbs, they work so scanning the OBD2 port (USA cars) show the error? scan it. NOW I READ the service manual to you, USA only, oK, not UK or india or down UNDER. USA 2005 T&C here we go, chapter wiring, lighting - exterior.and front only I am now skipping the EXPORT model pages, (< must I guess?)_ THE BCM runs both front TURN lamps. pure BCM body brain magic never seen on 1990 car. (this brand) NO fuse, no relays no flasher modules./ just the BCM brain. the cluster may have the noise maker device, no flasher modules here. so the BCM wants to make noise and does with cluster device, sonic. see how the books schemo show the word LEFT? (an amazing word) clear as day and means drivers seated perspective always. The BCM blink oddly of fast (dash) to tell you 3 faults were detected. 1 or more bulbs dead. 1 or more left wires or even bulb shorted or the wrong bulb used. or wires on this side (front are damages per below colors) WT/LG, ? white with light green stripe? tncfront-undefined-undefined-0.jpg bcm has over 18 pages of schematics, it runs a pile of body things. the BCM has its own fuse for just HAzards, there is one more clue did you check all fuses, in both fuse boxes, cab/bay? oops fuse 19 IPM box>? the BCM runs DRIVERS on all lamps here front and rear, and electronic drive. the fast flash sure does mean LEFT side is in a fault condition using the wrong lamps trailer hitch wiring damaged? Id hope this did not confuse the BCM.. the blink/ flashing (tunes ) is pure software loop, costing nothing to make no hardware , now, called a flasher to fail. the key here is the fast flash. and HAZ works. why not scan the OBD2 port,.after all fuses checked good. all boxes. also do any there body electrics fail. is a huge clue if true.
  • wrong lamps used !
  • shorted lamps in place
  • dead lamps in place
  • wires cut or shorted to that front left feed or to rear.
keep in mind turning left, does left front and rear what if the BCM only knows left feeds (both drivers) one is overloaded or under loaded. and cant tell you which it is , I sure can't at the cluster, it can only blink fast to say gee left is failing why not scan the cars OBD2 port to learn what is failing Rear lamps are 3057, sorry do not use LED lamps only real 3057 Oem type. front. 3457AK see that, they are not the same lamps and fronts are special. seen in the lost free users guide, i am reading now 2457ak have wedge base plug, NO LED lamps allowed no trailer hitch hacks seen (we look there first) wiring hacks just beg to make the BCM go nuts. so use only OEM lamps. no wiring damage no rusty connections to all lamps left side of car. some cars have blinkers on side mirrors, look for that too, present the BCM tells you left side is bad, that is all we know really and i bet it is not telling you lies. under and overloaded it can detect. it means to tell the driver, get there car serviced, Hazard my work due to 4 lamps flash and has for sure different rules in software to detect errors. (takes larger overload, and for sure under loaded different too. the BCM monitors lamp current flows.(and electronic ammeter there) on each driver./ 3457 , long life bulb 5000 hours possible FRONT amps on this bulb x1 is 2.23/0.59 .59 amps is park. ampere current/ 2.23amps is turn element, using LED this fails hard right here. i bet one lamp is wrong, or in pairs wrong. most car 2005 can detect 1 lamp bad. and for sure shorted. the current goes to 1/2 normal and fails, (cluster flashes faster) googling finds this, post clear as day sorry there is no flasher (device ) no classic silver round can plugs in, in any fuse box. 1990 is not the same first year of this cars,so dont read posts about 1990 ok? https://www.justanswer.com/chrysler/2ze9u-find-flasher-relay-2005-chrysler-town.html I posted now all the facts on this function, and top cause is wrong bulbs used, the LOVE of LED makes that true. and they fail hard. if finding that click rippling the dash asunder gets you a damaged cluster also air bags SRS can kill a tech so do all ripping out, with battery NEG lug pulled. FOR SURE any DASH work../ some cars even do the click sound using the radio speakers once found , out this, out comes the crying towel of wasted time and effort. or worse causing more damage.
7/2/2023 7:32:38 PM • 2005 Chrysler... • 59 views • 2 helpful votes
0helpful
1answer

2005 Chrysler Town & Country. The rear VES video screen will not display the movies on our Town & Country. Is this something I can fix?

Question edited for clarity. Question mover to Chrysler Town and Country. It is a vehicle issue, not a television issue. There are some videos and forum articles in the link. https://www.google.com/search?q=2005+Chrysler+Town+%26+Country.+The+rear+VES+video+screen+will+not+display+the+movies ..
3/18/2022 2:51:31 PM • 2005 Chrysler... • 241 views • 0 helpful votes
0helpful
1answer

2005 Town & Country, 3.8L. Engine cranks for

code p .0300 is multiple random misfires and that can be mostly a fuel pressure problem p0303 is misfire on no 3 cylinder an injector problem code p0 456 is EVAP system problem --small leak detected EVAP pressure sensor, mechanical fault--hose connections check the fuel pressure and check for a problem injector seal at no 3 cylinder it could be the source of low fuel pressure on starting
2/9/2018 9:09:03 AM • 2005 Chrysler... • 161 views • 0 helpful votes
0helpful
2answers

I have a 2005 Chrysler Town & Country minivan.

-Check to see if any fuse that supply power to it..? If it is then is the fuse blown or not. If it's blown then replace with new one. Good luck Mai
12/22/2017 9:36:03 PM • 2005 Chrysler... • 312 views • 0 helpful votes
0helpful
1answer

How do I replace the key battery on my 2005 Chrysler Town and Country?

Hi, to replace your battery you only need a 1/2 inch socket to remove the battery holder bolt which is located on the left side of the battery then loose the battery terminal and you ready to replace the battery, if you do a replace in less than 4 hours you do not need to reprogram the key neither the remote.
11/30/2017 5:03:03 AM • 2005 Chrysler... • 290 views • 0 helpful votes
0helpful
1answer

Replace battery on 2005 chrysler town and country key

if you have the battery handy , replacing the old immediately should not alter the programming the program will not hold indefinitely but replacing is a may be 30 second job and most key fobs hold the program for a minute
11/30/2017 3:33:03 AM • 2005 Chrysler... • 250 views • 0 helpful votes
0helpful
2answers

2005 Town & Country radio

First thought was bad ignition switch with failing accessory section.
10/28/2017 10:42:03 PM • 2005 Chrysler... • 448 views • 0 helpful votes
0helpful
1answer

2005 chrysler town and country

It is behind the glove box. There's a panel that slides out after the glovebox door is folded down.
10/11/2017 4:06:03 PM • 2005 Chrysler... • 447 views • 0 helpful votes
0helpful
2answers

My daughters town and country will not turn over.

something is getting wet
11/7/2017 4:45:04 AM • 2005 Chrysler... • 95 views • 0 helpful votes
0helpful
1answer

Cost to replace front wheel bearing?

WHAT DOES YOURE MOT TEST STATION SAY ON YOUR MOT
9/28/2017 12:57:03 PM • 2005 Chrysler... • 180 views • 0 helpful votes
0helpful
1answer

I have a 1998 chrysler town & country lxi the

ABS and Trac off lights on , did you have it checked for DTC'S - diagnostic trouble codes ? no one seems to know whats wrong ???? Have you had it to a repair shop or a dealer ?
9/7/2017 12:57:03 PM • 2005 Chrysler... • 285 views • 0 helpful votes
0helpful
1answer

Power Window Intermittent

May want to first check the wiring harness that runs along the inside of the door hinge to the body. With time, this harness experiences cracked and broken wiring to the window switch. If wiring is good, may want to check fuse and other wiring behind the fuse panel for wear.
6/17/2017 5:06:03 PM • 2005 Chrysler... • 221 views • 0 helpful votes
0helpful
1answer

Computer error code reads PO138.

yes replace the oxygen sensor
5/31/2017 3:33:03 PM • 2005 Chrysler... • 315 views • 0 helpful votes
0helpful
1answer

2005 chrysler town and country When I start

check the brake fluid level
6/23/2017 1:24:03 AM • 2005 Chrysler... • 102 views • 0 helpful votes
1helpful
1answer

Do I have to reset the PCM or replace it after replacing almost everything on 2005 chrysler T&C? still get a 300 code &check engine light

I have heard about the cranck sensor coukd be the problem
4/1/2017 3:50:04 PM • 2005 Chrysler... • 559 views • 1 helpful votes
0helpful
1answer

2005 town and country Sometimes will

May be a bad ignition switch or a bad ecm( computer).
4/23/2017 10:54:03 PM • 2005 Chrysler... • 124 views • 0 helpful votes
Not finding what you are looking for?
2005 Chrysler Town & Country Logo

2,046 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Town & Country Chrysler

  • Town & Country Chrysler

Most Popular Question

turn signal doesnt work drivers side

  • Cars & Trucks
Loading...