20 Most Recent 1993 Ford Ranger SuperCab - Page 7 Questions & Answers

0helpful
1answer

I cant locate the small spout connector

Did you replace the cap? If so you have the spark plug wiring wrong most likely.
3/18/2012 12:28:55 AM • 1993 Ford Ranger... • Answered on Mar 18, 2012
0helpful
1answer

.My 1993 3.0 V6 ford

Check both air and fuil filters. make sure the butterfly in the caberater is gaped and working corecttly if not its the auto. chock.
2/17/2012 7:30:41 PM • 1993 Ford Ranger... • Answered on Feb 17, 2012
0helpful
1answer

How do you change front differenial oil?

same way you do the rear remove the cover use a new gasket and oil about 3 litres gear oil
1/25/2012 6:11:30 PM • 1993 Ford Ranger... • Answered on Jan 25, 2012
0helpful
1answer
0helpful
1answer

93 RANGER W 4.0 ONLY RUNS ON SUPER UNLEADED FUEL. LOWER GRADE FUEL CAUSES VALVES TO RATTLE

maby you mean pinging ,,.check your egr.
1/25/2012 5:53:34 PM • 1993 Ford Ranger... • Answered on Jan 25, 2012
0helpful
1answer

Where is Oxygen sensor in my 1991 buick park avenue

you have 2 one in the exhaust manifold back of the engine and one in the front pipe behind the converter.
1/25/2012 5:47:46 PM • 1993 Ford Ranger... • Answered on Jan 25, 2012
0helpful
1answer

Where is the reservoir for the clutch on a 4 litre v6

The reservoir as your standing in front of the vehicle will be just to the right of the brake reservoir. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
1/15/2012 1:44:42 AM • 1993 Ford Ranger... • Answered on Jan 15, 2012
0helpful
1answer

How do you remove an

disconnect the universal joint remove the drive shaft remove crossmember put jack under ****** remove bolts holding it and then just pull it out
12/4/2011 1:13:29 AM • 1993 Ford Ranger... • Answered on Dec 04, 2011
0helpful
1answer

If i take a catalytic converter off will it still

yes you will have to weld a peace of pipe to the exhaust system where it came off. Oh and by the way it is illegal so if your car has to get inspected you will have to replace. and the convertor is worth a lot of money so dont throw it away
12/4/2011 1:09:11 AM • 1993 Ford Ranger... • Answered on Dec 04, 2011
0helpful
1answer

1993 ford ranger blinkers not working

first check fuse if fuse okay the turn signal lights dont work and flasher dont work problem could be faulty turn signal switch or faulty hazard flasher.which locate on fuse panel under instrument panel to the left of the steering column.
11/28/2011 8:59:31 PM • 1993 Ford Ranger... • Answered on Nov 28, 2011
Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

624 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ranger Ford

  • Ranger Ford

Most Popular Question

truck check engine light when start bogs

  • Cars & Trucks
Loading...