20 Most Recent 1993 Ford F350 Questions & Answers


if you Google your question a picture and diagram will come up showing you exactly all your information.

1993 Ford F350 | Answered on Mar 02, 2019


I would say that that is enough travel to disconnect your clutch.. doesn't matter whether fork is bent.. in saying that I had occasion to find a smaller bore slave for my small truck that was hard to change. And rather than change clutch I fixed it that way.. more likely our clutch has broken the diaphram spring ??

1993 Ford F350 | Answered on Jan 01, 2018


If not in the tank it will be on the frame rail near the tank . I dropped a 42 gallon tank , after draining , on a Suburban and it is a slow process to drain . Good luck

1993 Ford F350 | Answered on Aug 17, 2017


check the distributor.

1993 Ford F350 | Answered on Mar 05, 2017


old time injector pump,fit a non return valve in the feed and the return pipes ,they sell little alloy type valves for this purpose trhis will cure it iam sure

1993 Ford F350 | Answered on Aug 16, 2016


check for codes. it could be a ECM problem.

1993 Ford F350 | Answered on Aug 18, 2015


The selonid should be on the passengers side inner fender

1993 Ford F350 | Answered on Apr 23, 2015


Look back around the pump and see if any disconnections took place.

1993 Ford F350 | Answered on Apr 22, 2015


Are you waiting after turning ignition key on before actually moving key to start position? My diesel I turn key to 1st position;bells and lights;if engine is cold an amber light that looks like a lamp filiment comes on...wait until that light goes out before engaging the starter.

1993 Ford F350 | Answered on Mar 28, 2015


their should be a drain plug in the bottom of the torque converter accessed by removing the metal plate at the bottom of the bell housing facing the engine sump

1993 Ford F350 | Answered on Mar 12, 2015


I would suggest measuring the fuel pressure at the fuel rail under the hood. As i recall, the pressure while running will be around 40 psi.

1993 Ford F350 | Answered on Mar 10, 2015


summit racing and autozone sells them

1993 Ford F350 | Answered on Mar 10, 2015


there is none buy a haynes manual

1993 Ford F350 | Answered on Jan 12, 2015


Replace everything and save the head ache. Find the parts and negotiate the price. From the injectors up. IPR, glow pugs, Valve cover gaskets, oil sending unit. All of it. You will be better off to replace it yourself. I did it years ago for around $3000.

1993 Ford F350 | Answered on Dec 09, 2014


you could try to remove the EEC and inspect the pc board for leaking capacitors i hope it helps

1993 Ford F350 | Answered on Dec 03, 2014


check wiring on trailer

1993 Ford F350 | Answered on Aug 31, 2014


Check where the brake pedal push rod is , the switch should be there.

1993 Ford F350 | Answered on Aug 27, 2014

Not finding what you are looking for?
1993 Ford F350 Logo

270 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

F-350 Ford

  • F-350 Ford

Most Popular Question

93 f350 jump started starter selinoid

  • Cars & Trucks
Loading...