20 Most Recent 2004 Ford Expedition Questions & Answers

0helpful
2answers

I have a 2004 Ford expedition with a 4.6 Triton it has a double knock sensor setup on itall the parts houses can only find a single setup and they claim it's the same part number

Consult a Ford dealer. The parts houses may be referring the same information source which is incorrect.
2/11/2021 3:45:12 AM • 2004 Ford... • Answered on Feb 11, 2021
0helpful
1answer

Where is door lock relay?

has no relays that you can change or test , internal to the vehicle security module . Principles of Operation Power Lock The power lock/unlock feature requests all of the vehicle doors, including the liftgate, be locked or unlocked upon a customer request from any interior door lock switch in the vehicle. The power door locking system functions independently of ignition status or vehicle speed. When the vehicle security module receives an unlock/lock command from any door lock control switch, the vehicle security module will activate relays internal to the module to supply the correct power and grounds for the door lock actuators. Your best bet , have a qualified repair shop check it out .
12/27/2020 7:28:58 PM • 2004 Ford... • Answered on Dec 27, 2020
0helpful
3answers

DONDE ESTA EL CODIGO DE LA PUERTA DEL EXPEDITION 2004

el codigo lo encuentras en la parte del pasajero abajo del tablero hay una tapa de plastico en la pared de la camioneta quitas la tapa y esta en una etiqueta pegada creo que es en la computadora pero ai esta los codigos yo los encontre ahi ojala te sirva suerte.
6/19/2020 11:39:42 AM • 2004 Ford... • Answered on Jun 19, 2020
0helpful
3answers

I keep getthing the code p2198 on ford expedition 2003

Possible failed up stream Oxygen sensor.4_27_2012_7_55_50_pm.gif
5/28/2020 9:32:52 AM • 2004 Ford... • Answered on May 28, 2020
0helpful
4answers

I have a 2004 Ford expedition, does it have a PCV

The PCV valve is going the way of the carburetor, they are being phased out by "most" companies. If you can't find it, most likley it's not there. Thank you, Dana
5/27/2020 11:16:46 PM • 2004 Ford... • Answered on May 27, 2020
0helpful
2answers

My 2004 ford expedition power

CHECK POWER WINDOW UNLOCK RELAY.
3/16/2020 5:37:16 AM • 2004 Ford... • Answered on Mar 16, 2020
0helpful
1answer

Can you run a 04 Expedition without a diode for the AC clutch

Without the diode, risk damage to sensitive electronic components.
The clutch solenoid coil is similar to ignition coil, when energyzed they build magnetic energy that when deenergyzed, the colapse of the magnetic energy or field induces a voltage spike. This voltage spike is arrested by either capacitor or diode to keep the voltage spike isolated, from sparking, from damaging other components in the circuit involved.
7/4/2019 11:02:18 PM • 2004 Ford... • Answered on Jul 04, 2019
0helpful
3answers

Where is the fuel pump

67sunbeam, this is a rather complex system. The actual fuel pump,relay is located in the central conjunction box which is located behind the left kick panel. IT IS NON SERVACEABLE according to Ford. There is an inertia switch inside the left rear cab corner near the bottom. Just push it into the relay, if it was tripped, it will click.There is a fuseable link in the engine compartment next to the battery on the engine side. Aside from that, the fuel pump it self could have connection problems and more. Beyond the simple things, unless you fix cars for a living, it may cost you more to fix it you self than to bring it to a pro.
3/5/2019 2:06:00 AM • 2004 Ford... • Answered on Mar 05, 2019
0helpful
2answers

04 expedition ac is blowing hot compressor running and hoses cold I heard nocking noise but nothing now

check blend door. will blow hot even though lines are cold
2/9/2019 4:40:10 PM • 2004 Ford... • Answered on Feb 09, 2019
0helpful
1answer

PRNDL error, no backup aid

i think the computer is telling you that it is not recognizing what gear you are in as you can only start the vehicle in park or nuetral. thats the best i can do for you sorry
1/24/2019 11:51:55 PM • 2004 Ford... • Answered on Jan 24, 2019
0helpful
1answer

04 ford expedition 4.6 my gage keeps going up when I drive but the truck is not overheating, so their telling me that It can be the coolant sensor or switch but I can't find a diagram online for it

Could be the gauge also , which means the instrument cluster would have to be repaced . Rather then playing around with the coolant temp sensor an wiring diagrams , have it checked for code's . Your vehicle has a cylinder head temp sensor .(CHT) Principles of Operation The Expedition and Navigator instrument clusters are configurable, hybrid electronic clusters (HEC) that contain a microprocessor, gauges, indicator lamps, and internal circuitry. The instrument cluster is non-repairable at the dealership level with the exception of the warning indicator bulbs on the Expedition only and the instrument cluster lens on both the Expedition and Navigator clusters. The instrument cluster utilizes hardwired circuitry, the standard corporate protocol (SCP), and universal asynchronous receiver-transmitter (UART)-based protocol (UBP) communication networks. Communication using the SCP network transmits and receives data between the instrument cluster, the powertrain control module (PCM), and the anti-lock brake system/traction control/integrated vehicle dynamics (ABS/TC/IVD) module. Communication using the UBP network utilizes data transmitted and received by the instrument cluster and the four-wheel drive control module, power liftgate module (Navigator only), parking aid module, air suspension module, vehicle security module, driver seat module and the electronic air temperature control (EATC). For additional information regarding the SCP and UBP communication networks, refer to Section 418-00 . It is very important to understand:
  • where the input originates from.
  • all the information necessary in order for a feature to operate.
  • which module(s) receive(s) the input or command message.
  • Does the module which received the input control the output of the feature, or does it output a message over the SCP or UBP network to another module?
  • which module controls the output of the feature.
  • Temperature Gauge The PCM receives the engine coolant temperature status through hardwired circuitry to the engine coolant temperature (ECT) sensor. The instrument cluster receives the engine coolant temperature data from the PCM through the SCP communication network. The instrument cluster microprocessor monitors the engine coolant temperature data received from the PCM and commands the temperature gauge indication with a corresponding movement of the pointer.
  • Incorrect temperature gauge indication
  • Circuitry.
  • Cylinder head temperature sensor.
  • Powertrain control module (PCM).
  • Instrument cluster.
  • Go To Pinpoint Test E .
Your best bet , take it to a qualified repair shop . You have no idea of the electronic's involved here . PINPOINT TEST E: INCORRECT TEMPERATURE GAUGE INDICATION Test Step Result / Action to Take E1 RETRIEVE THE RECORDED DTCS FROM BOTH CONTINUOUS AND ON-DEMAND INSTRUMENT CLUSTER SELF-TESTS
  • Use the recorded instrument cluster DTCs from the continuous and on-demand self-tests.
  • Are any instrument cluster DTCs recorded?
Yes If instrument cluster DTC U1073 is retrieved, REFER to the Powertrain Control/Emissions Diagnosis (PC/ED) manual to continue diagnosis. For all other instrument cluster DTCs REFER to the Instrument Cluster Diagnostic Trouble Code (DTC) Index. No GO to E2 . E2 CARRY OUT THE COOLANT TEMPERATURE GAUGE ACTIVE COMMAND USING THE DIAGNOSTIC TOOL
  • Connect the diagnostic tool.
  • Key in ON position.
  • Enter the following diagnostic mode on the diagnostic tool: Instrument Cluster Active Command.
  • Select the instrument cluster engine coolant active command.
  • Trigger the engine coolant active command. Scroll in three increments 0%, 50% and 100%.
  • Did the temperature gauge start at cold when at 0%, move to half at 50% and full hot at 100%?
Yes REFER to the Powertrain Control/Emissions Diagnosis (PC/ED) manual to continue diagnosis. No GO to E3 . E3 CHECK FOR CORRECT INSTRUMENT CLUSTER OPERATION
  • Disconnect all instrument cluster connectors.
  • Check for:
    • corrosion
    • pushed-out pins
  • Connect all instrument cluster connectors and make sure they seat correctly.
  • Operate the system and verify the concern is still present.
  • Is the concern still present?
Yes INSTALL a new instrument cluster. REFER to Instrument Cluster in this section. TEST the system for normal operation. No The system is operating correctly at this time. Concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the self-test.
5/24/2018 1:39:34 AM • 2004 Ford... • Answered on May 24, 2018
0helpful
2answers

2002 explorer a/c blowing out of defrost and not dash vents

The direction of the air flow (dash/defrost/floor, etc) is controlled by vacuum going to the switch. There may be a vac line that didn't get connected or was damaged when they put the replacement engine in it. Check the lines on the firewall to make sure nothing is loose.
4/8/2018 4:18:30 PM • 2004 Ford... • Answered on Apr 08, 2018
0helpful
2answers

I have a 2004 Ford Expedition xlt edition. The

Could be either one or both get the battery charged if you have another vehicle hook up cables and see if it takes a charge for about 30 min DO NOT CRANK THE ENGINE FOR ANY REASON JUST PRESS YOUR REMOTE TO SHUT OFF THE ALARM SO IT DOESN'T GO INTO THEFT MODE AND PREVENT STARTING WHEN I WANT YOU TO START IT OK THIS IS VERY IMPORTANT THAT YOU FOLLOW WHAT I'M TELLING YOU OTHERWISE YOU WILL DRAIN THE BATTERY FROM CRANKING IN THEFT MODE ///////NEXT AFTER THE 30- 45 MINUTES OF CHARGING THERE SHOULD BE SUFFICIENT POWER TO START AND RUN THE ENGINE MAKE SURE THAT YOUR BATTERY HAS DISTILLED WATER IN IT IF YOU HAVE CAPS? ON IT BEFORE YOU START THE CHARGING PROCESS NOW FOR A SECOND OR 2 HONK THE HORN AND SEE IF YOU HAVE HEADLIGHTS A LOUD HORN AND STRONG LIGHTS WILL SHOW A CHARGE IF YOU HAVE A VOLT METER CHECK FOR VOLTAGE BETWEEN 12.5 TO 13.5 VOLTS IF YOU HAVE THE VOLTS THATS GOOD NOW START THE ENGINE IF THE BATTERY LIGHT IS ON IN THE DASH THE ALTERNATOR MAYBE BAD CHECK FOR VOLTAGE AGAIN WITH THE METER IT SHOULD BE 14.4 IF YOU DON'T HAVE A VOLT METER QUICKLY DISCONNECT THE BATTERY CABLES WHILE THE ENGINE IS RUNNING IF IT DIES THE ALTERNATOR IS BAD THE MOTOR SHOULD KEEP RUNNING OFF THE ALTERNATOR POWER THAT IT IS GENERATING SO GOOD LUCK I'M SORRY IF I LISTED THINGS OUT OF ORDER I'M A TAXI MECHANIC IN NYC WITH 50 YEARS OF EXPERIENCE BUT I'VE BEEN WORKING FOR 16 HOURS TRYING TO GET CARS RUNNING FROM VERY HEAVY RAIN HERE TODAY THE DRIVERS AREN'T SMART ENOUGH TO SLOW DOWN WHEN GOING THROUGH FLOODED ROADS AND HUGE PUDDLES AND I'M BY MYSELF THE OTHER 2 GUYS ARE OUT WITH THE SUPER BOWL FLU SO I'M TRYING TO HELP YOU ON MY LUNCH BREAK AND IN BETWEEN VEHICLES SO PLEASE READ EVERYTHING FIRST PUT DISTILLED WATER IN THE BATTERY FIRST IF YOU CAN OTHERWISE CHARGE IT AND DO THE REST DESCRIBED OK GOOD LUCK STEPHEN
2/5/2018 11:20:17 AM • 2004 Ford... • Answered on Feb 05, 2018
0helpful
1answer

My 1999 Ford Expidition has a miss fire. It

Check plugs leads , compression , Check petrol pump , And filters .
1/29/2018 2:47:35 PM • 2004 Ford... • Answered on Jan 29, 2018
0helpful
2answers

Why is brake warning light is on

It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure:-----

2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

Battery and brake Warning lights on Dash http://alltypesofpartsreplacing.blogspot.com/2012/10/battery-and-brake-warning-lights-on-dash.html-----------ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html------------

Brake warning light comes on and car will not start intermittently? http://repairhelpcenter.blogspot.com/2011/12/brake-warning-light-comes-on-and-car.html------------ When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html----------- Where is Power Brake Booster located on 1995 Lincoln Town Car? http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html----------- Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html-----------

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

---------- Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

----------- Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

---------- Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------ Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

------------- Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

----------- Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

------------- Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

---------- Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

--------- Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

---------- Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------ Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

------------- Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

------------- What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------ ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------- Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

----------- Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------ Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

----------- After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

---------- How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

----------- 1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------ How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

----------- What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

---------- How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

--------- Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

--------- Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html ---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

------------- Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------

These details will help.

1/16/2018 11:31:14 PM • 2004 Ford... • Answered on Jan 16, 2018
0helpful
1answer

Replacing the steering column in the 2004 expedition what all do you have to replace

It depends on what is broken.
1/14/2018 4:34:28 PM • 2004 Ford... • Answered on Jan 14, 2018
0helpful
2answers

2004 Ford Expedition - when I start it, more often than not the O/D light blinks and truck barely moves in any gear

The blinking O/D light is telling you the transmission has a trouble code...If vehicle can be driven stop by Advanced Auto, or any auto parts store and have them read the code/codes...When you have code send it to me... I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
12/19/2017 6:42:33 PM • 2004 Ford... • Answered on Dec 19, 2017
0helpful
2answers

Clicking noise inside from climate

I think you should go for manual first after that it would be easy for you to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here Ford Expedition 2003 2006 WorkSHOP Service repair manual Download
12/16/2017 10:41:26 AM • 2004 Ford... • Answered on Dec 16, 2017
Not finding what you are looking for?
2004 Ford Expedition Logo

1,472 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,186 Questions

1999 Ford Expedition
1999 Ford Expedition

1,824 Questions

1998 Ford Expedition
1998 Ford Expedition

1,625 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,162 Questions

Top Ford Experts

gerry bissi

Level 3 Expert

4390 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6928 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Expedition Ford

  • Expedition Ford

Most Popular Question

04 ford expedition 4 6 gage keeps going

  • Cars & Trucks
Loading...