1990 Ford Thunderbird - Answered Questions & Fixed issues
How do I adjust 1990 thunderbird headlights
To adjust your headlights you need to turn the stud that sticks through the support of the retainer connecting your headlights to the header panel. Use a 4mm socket or wrench. Been a while since I had mine, but I seem to recall it being a rather tight area to work with.
Each headlight has 2 studs you can adjust if I remember right, Left/Right and Up/Down. The stud closer to the inner parking lights or inner high-beams adjusts your Up/Down motion. The studs closer to the outer corner signal lights adjust the left/right.
2/10/2017 9:18:22 PM •
1990 Ford...
•
Answered
on Feb 10, 2017
•
294 views
What is the firing order on a distributor cap
Hi Elikapeka . which engine is in your Thunderbird? Also Why do you want to know? is it not running?
the V6 3.8 litre firing order is:
V-6 Firing Order: 1-4-2-5-3-6
if you are having running problems and you have the big carburetor rather than injection. a good tuner guy is your expert and these guys do it by ear if they know what they are doing.
4/4/2015 1:08:32 AM •
1990 Ford...
•
Answered
on Apr 04, 2015
•
285 views
How do you change u-joints
No . it is not normal to have to this as the Cross is bolted to the pinion flange with 2 small bolts for each side. The drive shaft will slide out of the rear of the gear box normally or if there is a flange there unbolt the 2 halves of the flange and remove it . Some diff pinions have the same arrangement depending on the make and capacity of the diff and torque requirements
12/5/2013 7:30:46 AM •
1990 Ford...
•
Answered
on Dec 05, 2013
•
43 views
Not finding what you are looking for?