20 Most Recent 2005 Ford Freestar Questions & Answers

I had the same problem with my ford freestar 2005 cruise control flickering
But not staying on I tried pulling up on the break pedal with my foot and boom its working awesome, thanks was whoever's comment that was. Super genius!!!

2005 Ford... | Answered on May 08, 2019

Tune-up current? Spark plugs, ignition wires or coils, coil pack can cause misfires. Is the Check Engine or Service Engine soon light on? If so, get it checked out. Most Auto Parts stores will do this for FREE. Good luck/

2005 Ford... | Answered on Apr 17, 2019

got to autozone.com look up water pump thean hit video it well show you

2005 Ford... | Answered on Jan 10, 2019


2005 Ford... | Answered on Nov 20, 2018

It is on the same button as the Trip Odometer. Cycle through until you see Tire Reset and hold the button down.

2005 Ford... | Answered on Aug 20, 2018

if have code for cam sensor retest sensor possible wiring problem new doesnt mean free from defects also check and test crank sensor

2005 Ford... | Answered on Jul 17, 2018

Do you have a scan tool that can access DTC'S - diagnostic trouble code's from the body computer . SJB - smart junction box .That would be the first thing to do . The SJB controls (turns on ) this light's . A problem with the circuit will set a code that should point to the problem area . Doesn't need to be ford dealer ,there are independent repair shops that can diagnose this.

2005 Ford... | Answered on Jan 17, 2018

Do you know anything about automotive electronic's ? body control modules , ford's SJB - smart junction box. Do you own a professional scan tool that can read codes in the SJB ? Auto part stores can not read these code's . Do you know how to do automotive electrical trouble shooting ,using a DVOM -digital volt ohm meter ? If not , your best bet would be to take your vehicle to a qualified repair shop.
Principles of Operation
The smart junction box (SJB) sends multiple voltage reference signals to the multifunction switch. When the multifunction switch is in the LH or RH TURN positions, or the hazard lamp switch is engaged, that input signal is routed to ground.
When the SJB receives a request for a turn signal or hazard lamps, the SJB supplies voltage to the appropriate turn lamps.
Do you know what a wiring diagram is ? Free one's here
http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click on lighting ,then under subsystem click on turn signal lamp . Click the search button then the blue link .

2005 Ford... | Answered on Dec 27, 2017

Best Manuals Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link.

2005 Ford... | Answered on Dec 21, 2017

What code ? P0000 what ? Search that on youtube .

2005 Ford... | Answered on Nov 06, 2017

So what's the question

2005 Ford... | Answered on Oct 31, 2017

Not finding what you are looking for?
2005 Ford Freestar Logo

1,024 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Freestar Ford

  • Freestar Ford

Most Popular Question

2005 ford freestar altenator went out

  • Cars & Trucks