20 Most Recent 1988 Dodge B250 Questions & Answers

0helpful
1answer

Dodge b250 windshield wiper arms disconnected from motor

take of the little panel under wind sheild youll see the mechanism remove bolts on wiper areas after you remove the wipers then get 2 packets of conectors from auto shop few bucks for 2 you need 4 lubricate and use a large socket and a mallet to seat the plastic conectors then replace the mechanism !! sounds difficult but its pretty easy if it doesn't work you need to recheck which way the bars are I messed it up once and it didnt work replaced the plastic conectors other way round reinstalled and done it worked
4/27/2021 4:00:32 AM • 1988 Dodge B250 • Answered on Apr 27, 2021
0answers
0answers
0helpful
1answer

Can anyone tell me what type of rear axle is used in a 1988 Dodge Ram Van B250?

your local parts store should be able to look it up for you along with capacity
12/5/2013 4:41:17 PM • 1988 Dodge B250 • Answered on Dec 05, 2013
0helpful
1answer

What controls spark on 94 dodge b 250 318cid

cam sensor in the distribtor
11/21/2013 1:33:17 AM • 1988 Dodge B250 • Answered on Nov 21, 2013
0helpful
1answer

Was driving home in my 85 ram with 318, blew

Yurn the engine over by hand until the 0 timing mark on the crank lines up with the pointer. Trace you #1 plug wire back to the cap, lift the cap and see where the rotor is pointing. If it's not at #1, or very close to it, you are right. #1 is the front plug on the driver's side. If it is lined up then you have another problem, likely related to overheating.
10/24/2013 7:56:21 PM • 1988 Dodge B250 • Answered on Oct 24, 2013
0answers
0helpful
1answer

Fuse box diagra

check think out . it has the fuse box diagram http://www.dodgetalk.com/forums/showthread.php?t=343283
7/6/2013 3:22:17 AM • 1988 Dodge B250 • Answered on Jul 06, 2013
0helpful
1answer

Locate ignition module on 1992 suburban gmc 1500 need to replace

CONTROL MODULE-IGNITION

1992 GMC Truck C1500 1/2ton Sub 2WD 5.7L TBI 8cyl

The Control Module-Ignition is located: Under hood, center, rear engine area, mounted in distributor
2/6/2013 5:20:40 AM • 1988 Dodge B250 • Answered on Feb 06, 2013
0helpful
1answer

Truck shouts off when at a complete stop

Could be a faulty idle speed control motor. Can you keep it running if you give some gas ?
9/17/2012 1:36:24 AM • 1988 Dodge B250 • Answered on Sep 17, 2012
0helpful
1answer

1988 Dodge Ram Power WIndows - Is there a fuse?

under hood is a relay
9/3/2012 5:01:29 PM • 1988 Dodge B250 • Answered on Sep 03, 2012
Not finding what you are looking for?
Cars & Trucks Logo

79 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,270 Questions

1999 Dodge Durango
1999 Dodge Durango

2,047 Questions

1999 Dodge Ram
1999 Dodge Ram

1,789 Questions

2000 Dodge Durango
2000 Dodge Durango

1,612 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,497 Questions

Top Dodge Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6928 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14942 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram B250 Dodge

  • Ram B250 Dodge

Most Popular Question

1988 dodge ram power windows fuse

  • Cars & Trucks
Loading...