20 Most Recent 1987 Dodge Ram Maxivan - Page 9 Questions & Answers


WHILE DRIVING THE RPMS WILL VARY OF COURSE. BUT IF YOUR SYMPTOMS ARE THAT THE IDLE IS ERRATIC WILDLY SCANNING UP AND DOWN . THEN YOUR IDLE AIR CONTROL VALVE IS INOPERATIVE PERHAPS.

Dodge Ram Cars &... | Answered on Apr 14, 2015


As a DIYer, you need a repair manual. you will want it later anyway. Your favorite auto parts store or possibly filepeep.com
if they have it, or manualslib.com

Dodge Ram Cars &... | Answered on Apr 05, 2015


one of the sensors has failed.

Dodge Ram Cars &... | Answered on Apr 02, 2015


it could be overdrive solenoid or the button is set to trailer towing mode

Dodge Ram Cars &... | Answered on Mar 30, 2015


you are going to have a wiring harness for both vehicles because they are going to be totally different the make and model different and all the different types of controls and upgrade one has, the computer wiring diagram or layout, the older vehicle may have less wiring than the newer one, all the new electronic devices installed on the newer car compared to the older vehicle. lights setup, if has power door locks, power windows, power trunk, powered whatever,
anti-braking, the vehicles computer system will all be different setup, codes for the devices in the car. it mite have the same motor but that all it will be just the motor.

good luck

rod

Dodge Ram Cars &... | Answered on Mar 26, 2015


Im not sure your reader gave you the correct code for your vehicle because its not even listed in your year's complete code list. here's the closest thing I found that I hope is your problem
.http://answers.edmunds.com/question-I-have-a-Dodge-Ram-1500-and-a-code-P1756-What-does-that-mean-67717.aspx

Dodge Ram Cars &... | Answered on Mar 24, 2015


There is no way to reset a radio in this condition. Take it to the dealer. There is a flash update that can be attempted but more than likely you need a new radio. I'm guessing you have a RA3 or RA4 radio. There is a known issue with 2013 MY radios.

Dodge Ram Cars &... | Answered on Mar 15, 2015


If it's AUTOMATIC , then NO DIP STICK , as transmission fluid is put in, and capped , as it does not need replacing , like Engine oil.

Dodge Ram Cars &... | Answered on Mar 14, 2015


try spraying some starting fluid in it, if it coughs/starts, you have a fuel issue....if no start, look for a spark issue

Dodge Ram Cars &... | Answered on Mar 14, 2015


check with an auto parts store they have a listing. if your trying to bypass the a//c then you can measure the belt routing leaving out the distance for the a/c. you could also try going to the dealer to see if they have a listing for your truck without a/c.

Dodge Ram Cars &... | Answered on Mar 07, 2015


Make sure you don't have any vacuum hoses of on the intake. If that doesn't work check mass airflow sensor. Unplug sensor if it run better with out the sensor being plugged in the replace. You can blow the sensor out with mass air flow sensor but I have not ha the best luck with this product.

Dodge Ram Cars &... | Answered on Mar 07, 2015


Use 1/2 in impact gun on the bolt. Easier to get at if pulley is unbolted and clean out dirt from big bolt head

Dodge Ram Cars &... | Answered on Feb 28, 2015

Not finding what you are looking for?
Cars & Trucks Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Ram
1999 Dodge Ram

1,786 Questions

1994 Dodge Ram
1994 Dodge Ram

197 Questions

2004 Dodge Ram
2004 Dodge Ram

173 Questions

1998 Dodge Ram
1998 Dodge Ram

142 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram Dodge

  • Ram Dodge

Most Popular Question

fix sticking caliper pistons

  • Cars & Trucks
Loading...