20 Most Recent 1994 Dodge Ram 3500 Questions & Answers

0helpful
1answer

Blower does not run

Check relay or swap with similar/known working relay...if still not working....control switch is inly possibility at that point.
4/22/2016 8:54:53 PM • 1994 Dodge Ram... • Answered on Apr 22, 2016
0helpful
1answer

Drove van,parked, then it would crank but not start? I check the power to fuel pump, none. no power to injectors either I've change relays, sensors and power control module and still nothing, please h

Check your owners manual for a fuel shut off button/reset, normally found somewhere in the back interior of the van near the gas tank fill. If you still don't get power, try checking your fuses, make sure you check for two fuse panels....one maybe under the hood and one under the dash. Check them using a lighted probe on both sides of the fuse. Also Google 1994 dodge ram 3500 wiring diagram, much found when I did it! I hope this helps!
11/29/2014 7:02:41 PM • 1994 Dodge Ram... • Answered on Nov 29, 2014
0answers
0helpful
1answer

How much oil do i use when changing oil and filter on my john deere tractor with a 20 hp. engine

after one quart-- check every 8 ounces--two quarts is what it should take if you got all the oil out Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/david_2f6e03df6c124197
5/18/2014 3:38:58 PM • 1994 Dodge Ram... • Answered on May 18, 2014
0answers
0helpful
1answer

94 Dodge Ram 3500 Van runs fine, but will not move

Dumb question but, did you check the trans fluid? A torque converter can hold 6 quarts of fluid or more and if the van has sat for an extended period of time the fluid drains from the converter and will come out of the vent tube causing a no movement issue
10/21/2013 5:57:45 AM • 1994 Dodge Ram... • Answered on Oct 21, 2013
0helpful
1answer

Trying to find where the cable for the flapper that opens and closes for the hot an cold air ends. Can any one help me?

That should be vacuum controlled. But if it is a cable you should be able to find it behind the glove box on the heater plenum
3/7/2013 2:20:48 PM • 1994 Dodge Ram... • Answered on Mar 07, 2013
0helpful
2answers

No fuel up to injecter pump truck just stalled

Did you check for fuel pressure on the line from the tank while you had the filter off? Do you hear your fuel pump prime when you turn the ignition on? First I would listen for the hum of the fuel pump when you turn the key to the run position (not starting the engine) May have to get a helper and listen at the gas filler neck with the cap off. If you dont hear your fuel pump, check your fuses and relays. If the relay clicks when your helper turns the key on ( put your finger on the relay and ear down close to feel/hear the relay actuate)., and fuse is good, yet you do not hear the pump prime, I would say your fuel pump is shot.

If it is a diesel,check for fuel pressure coming off the direct drive pump hose while cranking the motor.

Mike
11/15/2012 5:52:41 AM • 1994 Dodge Ram... • Answered on Nov 15, 2012
0helpful
1answer

Have got tail lights but no back up,brake , or flashers on the bck they all work on the front

Check the fuses. If they are still good.A flasher and replacement bulbs are pretty inexpensive.If this does not solve the problem,moisture or a short in the system may be the cause.
10/14/2012 5:32:58 PM • 1994 Dodge Ram... • Answered on Oct 14, 2012
Not finding what you are looking for?
Cars & Trucks Logo

83 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram 3500 Dodge

  • Ram 3500 Dodge

Most Popular Question

94 ram 3500 cummins

  • Cars & Trucks
Loading...