20 Most Recent 1988 Chevrolet Celebrity - Page 2 Questions & Answers

0helpful
1answer

Location of ignition modular

The ignition module is what the coils are mounted to if you have an engine without a distributor.
1/14/2013 9:29:30 PM • 1988 Chevrolet... • Answered on Jan 14, 2013
0helpful
1answer

I have an 1988 chevy celebrity 2.8. while driving, it will just all of a sudden lose power kinda like turning off the key and back on i have replaced ignition module, plugs and wires, mass air flow, m

Hi Charlie, I suggest you replace the fuel filter and have the fuel pump pressure tested for correct output. Have a diagnostic scan carried out. Regards John
11/11/2012 6:04:38 PM • 1988 Chevrolet... • Answered on Nov 11, 2012
0helpful
2answers

Will start and run but if u turn it off 4 a min it

That problem is most likely the ignition module inside of the distributor, and you can remove it and have it tested for free at most auto part stores.

The ignition module could also have been damaged by a faulty ignition coil or a damaged distributor cap that allowed secondary voltage to flow over the ignition module, or a shorted pick-up coil inside of the distributor could also have caused the ignition module to malfunction, and in that case you should replace the distributor. (if the ignition module does test out to be alright then the pick-up coil is the next likely culprit)

Be sure that if you purchase a new ignition module that it does come with either a silicone grease, or a die-electric compound, and be very certain that you completely cover the metal mounting contact area under the ignition module with that silicone grease or die-electric compound because it is a heat sink and the ignition module will overheat without it, and be very careful that you do not over-tighten the ignition module or it will be damaged.

Be sure that you also clean off the mounting surface for the ignition module on the inside of the distributor very well before you install the ignition module, and if installing the old module back into the distributor be sure to obtain either silicone grease or a die-electric compound for it.
11/3/2012 12:29:58 AM • 1988 Chevrolet... • Answered on Nov 03, 2012
0helpful
1answer

I got the spark plug wirys mixed up

Here's the firing order, you should be able to correctly plug each in now.10_23_2012_2_44_29_pm.jpg
10/23/2012 2:44:33 PM • 1988 Chevrolet... • Answered on Oct 23, 2012
0helpful
2answers

My car just stopped running and it turns over but wont start.

Someone will have to diagnose the ignition system. It could be a relay, the ignition module, cap and rotor if equipped, or a long list of other things.Is the check engine light on ? Have you checked it for trouble codes ?
10/23/2012 8:52:53 AM • 1988 Chevrolet... • Answered on Oct 23, 2012
Not finding what you are looking for?
Cars & Trucks Logo

150 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Celebrity Chevrolet

  • Celebrity Chevrolet

Most Popular Question

1988 chevy celebrity went change rear

  • Cars & Trucks
Loading...