20 Most Recent 1988 Chevrolet Celebrity Questions & Answers


I think those fault codes are the source of the problem, follow the links to learn more.
https://www.freeautomechanic.com/gm-code-43-electronic-spark-control.html


GM OBD Trouble Code 53

1988 Chevrolet... | Answered on Oct 27, 2017


Probably a T-50. Due to the use of Locktite on these bolts, an impact wrench will be required. Do not use Locktight when reinstalling these bolt. Just get them tight ( 1/2 in. drive ratchet)

1988 Chevrolet... | Answered on Jun 04, 2017


replace the complete steering column or have someone that knows how to fix it repair it,

1988 Chevrolet... | Answered on Nov 16, 2016


Before trying to take the drum off, you could have used a rubber hammer give it a few licks around. On the back side of backing plate should be a cavity where you can use a break tool or screwdriver to release brakes from drum.
Put the drum back on and see if it will come off the right side, first.

My biggest problem is I can't see anything from here.

1988 Chevrolet... | Answered on Dec 18, 2015


On the 6 cylinder it is located on the left side of the engine when look at it not far from the number one cylinder. in line with the bearings and seals on serpentine belt side next to fire wall about 10 o'clock while facing engine standing at passenger side front wheel.O7OUT

1988 Chevrolet... | Answered on May 02, 2014


On the 6 cylinder it is located on the left side of the engine when look at it not far from the number one cylinder. in line with the bearings and seals on serpentine belt side next to fire wall about 10 o'clock while facing engine standing at passenger side front wheel.O7OUT

1988 Chevrolet... | Answered on May 02, 2014


check the bulbs most likely one is burned out .... that will cause light to not bilnk

1988 Chevrolet... | Answered on Apr 28, 2014


First you add octane booster to two year old gas. It is too late for stabil. Find the idle air solenoid and take it out and clean it with throttle body cleaner. Try not to push it in or out. Reinstall and turn on key for I min. and off for 1 min. then start the car.

1988 Chevrolet... | Answered on Dec 02, 2013


have the fuel pressure checked to ensure that it's consistent. If you have a cel light on check for those codes as well. also check for a vacuum leak and check for a stuck egr valve.

1988 Chevrolet... | Answered on Nov 03, 2013


i had the same problem and it would get warmed up and stall out when i was at a light and idle, even coasting on the road.. it was a bad Starter coils.. it has three and i had one that was half way gone and causing all that trouble.. i had another one that went out all the way and the car ran so bad i thought my tranny broke even.. they cost about $30 each and fixed it myself..

1988 Chevrolet... | Answered on Oct 13, 2013


The problem could be with the torque converter if your car is with automatic transmission.

1988 Chevrolet... | Answered on Oct 01, 2013


The fuel tank probably got filled too much gas, and the float got bent, or the float was not installed properly, when the fuel pump was installed.

1988 Chevrolet... | Answered on Sep 14, 2013


yes, the four cylinder is TBI (throttle body injected0, the V6 is mulyi-port injected.

1988 Chevrolet... | Answered on Jun 12, 2013

Not finding what you are looking for?
Cars & Trucks Logo

150 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

john h

Level 3 Expert

23504 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Celebrity Chevrolet

  • Celebrity Chevrolet

Most Popular Question

1988 chevy celebrity went change rear

  • Cars & Trucks
Loading...