20 Most Recent 1998 Chevrolet Venture Cargo Questions & Answers

it could be the o2 senser

1998 Chevrolet... | Answered on Apr 27, 2014

Make sure the thermostat was the right temp range. Had same problem on ford truck and parts store gave me a 160 when it should have been a 180 degree thermostat.

1998 Chevrolet... | Answered on Feb 17, 2014

Do you have power in and out of the dimmer switch ?

1998 Chevrolet... | Answered on Feb 04, 2014

possibly bad motor or bad switch check and replace.

1998 Chevrolet... | Answered on Nov 03, 2013

Try to replace your keyless remote batteries. To reprogram car computer remove negative battery post first and wait 20 min and then reconnect neg post last.

1998 Chevrolet... | Answered on Oct 12, 2013

you have a bad power steering pressure sensor, seending you some info on it,The switch's function is to signal the PCM when the power-steering system exceeds its normal operating hydraulic pressure, like when you cut the steering wheel all the way to one side and hear that hissing sound from the pump. The PCM then raises the idle speed and/or disengages the air-conditioning compressor to prevent the engine from stalling.

1998 Chevrolet... | Answered on Nov 03, 2012

put your key in the ignition switch leave it in the off position, press the remote start button, if it starts and you did not install a transponder bypass modual in it you will require one, if you need one let me know as I stock this item

1998 Chevrolet... | Answered on Oct 20, 2012


The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems.

1998 Chevrolet... | Answered on Oct 03, 2012

Not finding what you are looking for?
Cars & Trucks Logo

189 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Venture Chevrolet

  • Venture Chevrolet

Most Popular Question

1998 chevy venture running hot change

  • Cars & Trucks