20 Most Recent 1998 Chevrolet Cargo Questions & Answers


Enter car ensure all doors are shut
Switch ignition on [do not start car]
Press and hold lock button on key for 10 seconds
Switch ignition off
Wait 3 seconds
Exit and check its reset ok.
good luck barry

1998 Chevrolet... | Answered on Nov 14, 2009


They are on the same electrical circuit as your marker lights. You could have a bad ground at the license plate area.

1998 Chevrolet... | Answered on Nov 22, 2008


If your car is recalled you may be able to have it fixed free of charge
cheek it and the link below-http://www.motortrend.com/used_cars/11/chevrolet/g10_van/recalls/index.html

1998 Chevrolet... | Answered on May 14, 2008


Try to get it running a bit to warm up the exhaust. Take a point and shoot thermometer and take the temp of the cat. If temps exceed 400 degrees I would start to suspect a plugged cat.

Chevrolet Cargo... | Answered on Mar 06, 2017


could be the float in the tank might have a hole in it and is stuck

Chevrolet Cargo... | Answered on Jan 06, 2012


there is probably something foreign blocking the channel, try spraying it with some type of lubricant.

Chevrolet Cargo... | Answered on May 28, 2011


Hello jamlee57,

The spark plug wires could be bad or the distributor cap or even the rotor could be bad.

Good luck,
netvan

Chevrolet Cargo... | Answered on Mar 29, 2011


well first thing is it does not have a carburator, it has a throttlebody. and the fuel pressure needs to be atleast 45psi continous, and a couple pounds less while cranking. first thing to check would be fuel, then spark. if both are present, then do the pressure check. could have helped with more info.

Chevrolet Cargo... | Answered on Dec 31, 2010


a dirty or miss firing fuel injecter was a common thing on them vans i would have the injecters tested and cleaned.

Chevrolet Cargo... | Answered on Dec 10, 2010


use a light up screwdriver and work on elimination ,turn side lights on then find the feed for these then the stop lights and then the indicators and so on .easy ,even a meter will do but i prefer my cheap little screwdriver with a wire and a clip attached .Maybe even make a test light up with an old bulb holder and two wires

Chevrolet Cargo... | Answered on Nov 03, 2010


I wish i could help you this is nick

Chevrolet Cargo... | Answered on Oct 18, 2010


best approach is to get a scan. Are you having starting problems?

Please see my tip at http://www.fixya.com/cars/r5932051-check_engine_light_check. These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Chevrolet Cargo... | Answered on Oct 12, 2010


Pull the transmission and torque converter.

Chevrolet Cargo... | Answered on Oct 10, 2010

Not finding what you are looking for?
Cars & Trucks Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cargo Chevrolet

  • Cargo Chevrolet

Most Popular Question

anyone help reset car key

  • Cars & Trucks
Loading...