20 Most Recent 2005 Chevrolet Venture Questions & Answers

First off...Is it actually overheating? Or is the gauge just saying it is overheating? You could check the sensor which I believe is below the thermostat housing. Second I noticed you say you HAD the work done...was this at an actual auto shop or you or a friend doing this work? If it is a shop, they should be able to diagnose the problem. If a friend then have them check the resistance on the sensor. With all the replacements and repairs there can't be many problems except the sensor or the timing...If the timing is to far advanced then the engine will overheat. That is where I would go after checking the temp sensor. The timing on small engines will determine what temp the engine runs. Good Luck

2005 Chevrolet... • Answered on Dec 15, 2017

Don't see how one would blow the fuse an not the other . The remote function is controlled by the BCM - body control module or vehicle interface . Regardless ,the module an the switch on the steering wheel both energize the horn relay ! Do you know what a relay is an how it works ? Check the horn relay VEHICLE RELAYS Operation Diagnosis

2005 Chevrolet... • Answered on Oct 14, 2017

The light you see on the dash may cover other things too.Do you have your manual in the glove box.Check in it to see what is covered by the light you see on the dash.A brake warning light on the dash could be low fluid warning,but could also be a emergency brake not released fully,a service brake problem or an ABS problem etc.

2005 Chevrolet... • Answered on Apr 22, 2017

Middle is normal.

2005 Chevrolet... • Answered on Aug 30, 2016

I cant get on my phone because of Google

2005 Chevrolet... • Answered on Apr 06, 2016

Likely a bad lock actuator in the lift gate. If you look carefully you will find a manual release for it in the back. (You will have to crawl back there.)

2005 Chevrolet... • Answered on Aug 05, 2015

If your front windows work, it is not the fuse (same fuse used). More likely, either the motors have seized or the mechanism has never been properly lubricated so the mechanism itself is frozen.

2005 Chevrolet... • Answered on May 07, 2015

check for trouble codes is the first step may be protecting itself when a solenoid goes bad or some wiring got disconnected

2005 Chevrolet... • Answered on Apr 03, 2015

if you're asking this vague without any specifics, take it to a shop and they'll do a code scan, visual inspection of the fluid's condition/color/smell, check the solenoids, etc if your vehicle has a dipstick, pull it out and see / smell for burnt fluid... if that's the case, a rebuild is in order or a replacement

2005 Chevrolet... • Answered on Apr 03, 2015

In the underhood fues box or just disconnect the power to the compressor. You will have to live with a ride control warning light on though.

2005 Chevrolet... • Answered on Sep 26, 2014

Check the fuse or the bulb

2005 Chevrolet... • Answered on May 05, 2014

Not finding what you are looking for?
Cars & Trucks Logo

147 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

john h

Level 3 Expert

24110 Answers

Ryan Lutton
Ryan Lutton

Level 3 Expert

1266 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Venture Chevrolet

  • Venture Chevrolet

Most Popular Question


  • Cars & Trucks