20 Most Recent 2004 Chevrolet Tracker - Page 3 Questions & Answers

you mean serpentine belt it should be right in front of the engine right behind the fan

2004 Chevrolet... | Answered on Jul 29, 2010

First be cretin that the belt's are an exact match, sometimes it's a really tight fit, hope you are using a tensioner tool that allows full travel of the tensioner. Often times it is which pulley you are trying to slide the belt over, your best bet is to go for the idler & tensioner pulley because they are not ribbed, thus you don't have to fight with it go over an edge that has a guide.

2004 Chevrolet... | Answered on Mar 20, 2010

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway.

on the following LINK. It has several Belt Diagrams, one which will match your specific engine and options (AC/No AC, Power Steering, .etc) that you will need.

Regarding HOW:
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See the Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right etc.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum ("open") allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. While keeping the Tensioner Pulley/Arm "open" Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
As you can see in the last Diagram on this Link: there are three (3) Bolts for the FAN Belt that must be loosened inorder to successfully remove this Belt

Let me know if this helped...
Again my apologies..


2004 Chevrolet... | Answered on Mar 14, 2010

replace with new bearing bolts on

2004 Chevrolet... | Answered on Mar 04, 2010

On the front differential there is a thermal actuator. It engages your front differential. In parts catalogs they are called 4wd actuator. they are not easy to replace.

2004 Chevrolet... | Answered on Dec 29, 2009

Have you checked the stabilizer bar ball joints? I had one come undone and it made a hell of a clunk.

2004 Chevrolet... | Answered on Dec 10, 2009

procedures say to push and hold hour button for 5 seconds untill you hear a beep then set the hour by pushing one at a time sequence. same with the minute button ...hope this helps..good luck

2004 Chevrolet... | Answered on Nov 26, 2009

try these websites www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your baby SUV you can stop by your local chevrolet dealer in the parts department and they should be able to print you out one wish you the best of luck Michigan Man.

2004 Chevrolet... | Answered on Oct 22, 2009

fan belt is slack, or old and worn, replace

2004 Chevrolet... | Answered on Oct 06, 2009

HI. I would advise to have the oil pressure sending unit(sensor), and oil pump inspected immediately for faults. If the oil pressure sending unit is operational , and the wiring is ok, replace the oil pump and screen.

To verify proper oil pressure, i recommend purchasing a manual oil pressure test kit form your local auto parts store. This will make it easier to isolate the actual issue.

NOTE- The most common error will be a faulty sending unit, or sensor(oil pressure)

2004 Chevrolet... | Answered on Oct 05, 2009

the bulb goes in from the rear, dont take the headlight assembly out.

2004 Chevrolet... | Answered on Oct 04, 2009

remove it and reset inplace

2004 Chevrolet... | Answered on Sep 30, 2009

Try this link. While it is not specific to your Tracker, it is a good video step by step overview which will help you a lot.

2004 Chevrolet... | Answered on Sep 06, 2009

Hi, mate. You can put any named battery, Has long the ampage is the same as the old one.

If your old battery said,( 120amp) that is the starting power to turn the vehicle over quick enough to fire in, and turn on it's own.

I hope this as help you??

2004 Chevrolet... | Answered on Aug 04, 2009

Have you tried replacing the rad cap ? or leaving the rad cap off while running your vehicle for a while to ensure that their is no air locks in the coolant system?

2004 Chevrolet... | Answered on Jul 29, 2009

theres up and down arrows on the bottom right hand corner of the radio when held in for a few seconds it starts to change the time..

2004 Chevrolet... | Answered on Jul 24, 2009

your check engine light can go off for a number of reasons spark plugs misfiring,a umber of reasons if you wanna save some money from ers ripping you off take it in to your local mechanic or grease monkey some parts stores will even check its called an OBD2 scanner its a machine they plug into your car simple cheep and often eaiser then dealing with snakes

2004 Chevrolet... | Answered on Jul 02, 2009

the lights don't turn off.. they're called daytime running lights they never turn off. they just get brighter at night. and the radio has up and down arrows in the bottom right quarter and when u hold one in it starts changing the time :)

2004 Chevrolet... | Answered on Jun 07, 2009

Thats just like a check engine light. Take it to autozone and ask them to check for trouble codes. They do it for free. that will give you some idea what is going on, but if they try to sell you anything, don't buy anything until you get a second trustworthy opinion.

2004 Chevrolet... | Answered on Apr 26, 2009

you must have a problem with eng. you need to go to a shop with a obd2 code scanner they will telyou
wat have to be done to correc the problem

2004 Chevrolet... | Answered on Apr 26, 2009

Not finding what you are looking for?
2004 Chevrolet Tracker Logo

112 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tracker Chevrolet

  • Tracker Chevrolet

Most Popular Question

car losses power

  • Cars & Trucks