20 Most Recent 1986 Mazda 323 - Page 6 Questions & Answers

Mr, Parker check first the fuse box for any blown fuse and also any relay. Fuse box is on the driver's side legroom and also for relays under bonnet engine compartment. Another possibility for side lights might the bulbs blown and and dashboard as well. For better resolve ask the help of an expert-car electrician.

If you retapped the holes, Could be metal in it stopping the bolt.

You may refer to the complete details on adjusting the ignition timing below.

http://autorepair.about.com/library/faqs/bl438i.htm

If the engine is not the same as the above, you may loosen the distributor and turn it to get the timing you desire.

If you do not have the same symptoms as the one in the link. You may just have a leaking vacuum hose or you may just need the lines cleaned.

call metro express lanes direct by and ask how you can pay the violation it has nothing to do with this page

possible from boiling water from an overheating engine stuck in traffic , fan/s not working, on the phone , no attention to gauge

on the inside of the door above the door panel hinge side is a plastic cover almost triangle shape use flat screw driver to carefully pry off and the mirror mounting bolts will then be accessable

Yes you can not use it.

With the engine cold, standard valve clearance is 0.010-0.012 in. (0.25-0.31mm) on intake and exhaust sides

That looks like an older model car and if that is the case and you are having shifting issues, the problem is most likely related to the wear and condition of the transmission. There are parts in them that need to be replaced like clutches and bands.

1988 Mazda 323 speedometer problem - YouTube

? 0:23 www.youtube.com/watch?v=-uXh8WtbovQ Dec 12, 2011 - Uploaded by fc3s690 Does this on cold mornings, in this video I am driving a steady 70mph according to my gps.

servo sensor needs replacement

is your window manual or automatic?