20 Most Recent 1986 Mazda 323 Questions & Answers

try also posting the question for a Ford Laser/Meteor KA/KB, which this car is also sold badged as in some markets.

1986 Mazda 323 | Answered on Aug 25, 2019

The 1987 323 has an electric fuel pump. If your car is a hatchback, in the rear compartment where the spare tire is located, to the left of the spare, is a safety reset switch for the fuel pump. It shuts off the fuel pump if the car is jarred in certain ways in an accident.

1987 323 Fuel Pump relay Location Mazda Forum Mazda Enthusiast Forums

1986 Mazda 323 | Answered on May 19, 2018

I doubt it's a MAF issue. But you can try unplugging it with engine off. When it's unplugged the computer will run off factory defaults. Far more likely you've got another blown fuse or a blown fusible link.

1986 Mazda 323 | Answered on Oct 26, 2017

One is under the hood. The other is on the end of the dash where the closed door hides it. Depending what month it was made, could be driver's side or pass side.

1986 Mazda 323 | Answered on Apr 16, 2015

It sounds like you need to service the transmission,new filter and fluid should clear up this problem.

1986 Mazda 323 | Answered on Apr 14, 2015

check the fuse

1986 Mazda 323 | Answered on Apr 07, 2014

Sounds like you have worn gearbox selector linkages and I suggest that you get someone to take a look at them PRONTO.

1986 Mazda 323 | Answered on Jan 21, 2013

Hmmm.. looks like ignition prolem!

If ur 1986 323 has contact point and condenser in ur distributor, check that and replace if possible!
If u have an electronic ignition, the fault will be the ignition module!
Check if there is any SPARK coming out from ur SPARK PLUGS and CABLE!
tell me more!

1986 Mazda 323 | Answered on Jan 03, 2013

When you did the ball joints you should have pulled the axles

I would guess that you know the axle nut has to come off & that
in most cases you break the bottom ball joint loose, so you can
get the axle out of the steering knuckle

So I will guess you can't get the axle out of the trans

You use a long pry par,3 foot or more & put the end against
a piece of wood, so as not to pry on the aluminum trans case

Then you pop it out with the pry bar.
You don't pry on the axle ,you use the side of the pry bar
to bang it with the end against the wood

1986 Mazda 323 | Answered on Sep 29, 2012

Not finding what you are looking for?
Cars & Trucks Logo

78 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 Mazda 323
1994 Mazda 323

364 Questions

1991 Mazda 323
1991 Mazda 323

122 Questions

1993 Mazda 323
1993 Mazda 323

81 Questions

1992 Mazda 323
1992 Mazda 323

68 Questions

1990 Mazda 323
1990 Mazda 323

60 Questions

Top Mazda Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

323 Mazda

  • 323 Mazda

Most Popular Question

1986 mazda 323lx gears disappear

  • Cars & Trucks