20 Most Recent 1995 GMC Sonoma - Page 5 Questions & Answers

Here's a link to your serpentine belt removal.

Go to You Tube Video & watch it

you cannot adjust all the valves on tdc; only certain ones and then you have to change the position of the crankshaft again for the rest. google the procedure.

If its not in the side or bottom of the air tube or duct then it has to be in the throttle body.

does the truck have manual lockout hubs on it? if they arent locked in the 4wd wont work..usually the truck needs to roll some distance in neutral transmission gear for the transfer case to engage..and rolling slowly just above walking speed..

''Throw out bearing'' has destroyed itself.... time to pull the transmission and replace it and the clutch and pressure plate, and turn the fly wheel smooth.

What else can what be?

Battery has to be 12.6 or more or it is no good

Code 44 is for an O2 sensor reading lean. The sensor measures oxygen in the exhaust to tell if the fuel mixture is rich or lean.It could be a faulty sensor, or a fuel problem among other things.

Hi and welcome to FixYa!

Two things to look at. Starter and ignition coil. If one of this is faulty there will be no current to burn fuel. I strongly suggest that you replace it resolve the issue.

Hope this helps and thank you for using FixYa! Have a good one!

Check the fuel pump relay.
Check the fuel pump auto shutoff switch, push RED reset button.

in the back it has a swith push red button reset it

So by now you have filled the radiator and checked it for leaks, right ?