20 Most Recent
2005 GMC Yukon Xl Denali - Page 3 Questions & Answers
The hatch lock on my car is stuck on a piece of cloth and won't open
How I usually handle these things is with a helper and a large pry bar, and a piece of shop rag/clothe towel.
what you need to do is have some one activate the lock/ release and while they are operating the latch, use the pry bar to force the lock lug over the locking catch. once you have the open use a razor and a pair of small needle nose pliers to remove any remaining clothe.
No left turn signal
In these newer cars they have installed separate fuses one for each side see if that is the case, if it is problem solved. If not you will need to check the line with a meter to see if you have any power going to the light area . If that's the case hook a hot lead of the turn signal and trace it backwards. Have you also changed the flasher unit. If not try it.
Driver's side power seat and heat in both seats not working
hello, have someone check all fuses-and plugs for the power seat, they may be a relay for this problem, can call autoparts store and ask about any relays for the heated seats and the power seat, if thats not it you may have to replace, electric motor for seat, sounds like a fuse, the way it all quit working..
One wheel slips while turning
Bad wheel bearings will allow the rotor to touch the sensor and put the ASBS light on. They will also allow the rotor to bind up in the caliper and that has the same affect of locking the brakes on, on that wheel. Have a specialist front end service person inspect and check the problem
System stability disabled
it's a suspension system that makes sure your car is designed to help keep your car in control in CONTROLLABLE, in a UN-controllable condition ( to a degree ) ie.. slipping on ice, wet roads, etc..
Reduced engine power
Need more info. I noticed you also have a Q on here about your stability system.... Just as a guess... I'd say you have low power and a lit up dash " including the ABS light ". You need to check your ABS system first. A bad wheel speed sensor or hub bearing can cause all of this. The ECM sees it as one wheel locking up and reduces engine power and trips the Stabilitrac.
Service ride control 05
No. This is basically telling you that the electronic portion of the suspension system has a fault. All the basic mechanical items will still work as normal. It is common on those truck to have the Auto Ride pump go bad for the air suspension in the rear.
Not finding what you are looking for?