20 Most Recent 1992 Ford Crown Victoria Questions & Answers

Take out the inner fenders or work through them but this is hard take out the inner fender splash guards it gives you more room from underneath and remove the tires those bolts are prone to snapping from age and corrosion so liquid wrench them for a few days letting it penetrate keep spraying while driving it if you have to use the car

1992 Ford Crown... | Answered on Oct 07, 2019

There's this website www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, troubleshooting owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I
keep servicing and when needed repair it on my own. worth it !!!

1992 Ford Crown... | Answered on Mar 18, 2018

Sounds like fuel pump wiring, but could be fuel pressure regulator is bad or vacuum hose to it is bad. Also check for ANY vacuum leaks. Replace fuel filter,too. don-ohio

1992 Ford Crown... | Answered on Mar 26, 2017

Disconnect the battery NEGATIVE cable for 5 minutes.

1992 Ford Crown... | Answered on Oct 17, 2016

You either have a leak from the pump area or one of your hoses is leaking. Start your motor and watch for where it is leaking from.

1992 Ford Crown... | Answered on Jan 02, 2016

Air ride suspension basically works like this. you have a small air compressor and a sensor that connects between the rear axle and the under body Frame. When this sensor detects a load movement like more or less weight it turns on the air compressor to air up or opens a exhaust valve to let air out. most common problems with this system. broken or disconnected sensor. leak in the air lines between compressor and shocks. or a bad or weak compressor.

1992 Ford Crown... | Answered on May 07, 2015

Your exhaust system could need to be replaced. By removing the cats you lost required back pressure that gives your car power.

1992 Ford Crown... | Answered on Apr 01, 2015

Check your maf/map sensor. Could also be your starter on its way out

1992 Ford Crown... | Answered on Apr 01, 2015

The most likely cause is a bad ignition coil, remove the coil wire from the distributor and attach an old spark plug to it, have a helper crank the engine, and see if the spark plug fires. If the plug does not fire then the coil is bad. If the plug fires, remove a plug wire from a spark plug and repeat the process. If no spark then the distributor cap may be bad? Also have you ruled out no gas???

1992 Ford Crown... | Answered on Jan 11, 2015

Change channels ;)
(this is an old post, so I recon it was solved by the user) :)

1992 Ford Crown... | Answered on Jan 03, 2015

No idea what statement is about

Try again

1992 Ford Crown... | Answered on Nov 13, 2014

It's coming from your circulation vent,have it set on recirculation,that way the out side vent is closed,will cause carpet to mold underneath.

1992 Ford Crown... | Answered on Oct 15, 2014

Not finding what you are looking for?
Cars & Trucks Logo

371 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Crown Victoria Ford

  • Crown Victoria Ford

Most Popular Question

automatic transmission 1992 crown

  • Cars & Trucks