20 Most Recent 1994 Mazda 323 Questions & Answers


If this vehicle has a distributor, try replacing the pickup coil. This should be located under your distributor cap and is responsible for spark. When your engine compartment gets warm from normal conditions, this plastic piece of **** shrinks and the metal tab attached to it doesn't make a good enough connection to conduct the electric spark to your plugs. Hope this helps!

1994 Mazda 323 | Answered on Jun 24, 2020


What about fuel filter or fuel pump?
Sounds like it is not getting the fuel through or is getting to much fuel
Check choke not sticking and air filter clean etc.
Regards Craig

1994 Mazda 323 | Answered on Feb 13, 2018


Did you use an impact to change the water pump? If you did not and reversed the rotation of the engine you bent a valve stem. Dohc has this quirk

1994 Mazda 323 | Answered on Jan 01, 2018


Could be your coolant temperature sensor.Here's a link on how to replace. Repair Guides Electronic Engine Controls Water Thermosensor coolant... Here's a link to a new one,you may need a thermostat also.Here's a link to replacing the thermostat,next to the coolant sensor. Repair Guides Engine Mechanical Thermostat AutoZone com Here's a new one. Duralast Thermostat 41492 Read Reviews on Duralast 41492

1994 Mazda 323 | Answered on Jul 03, 2017


I know this question is old but I recently encountered a similar problem with my 1995 323 BA and this may help someone else. Override the immobilizer by doing the following:


open the car via the drivers door
put the key in the ignition
turn the key to ACC
now turn the key to ON
repeat the last 2 steps X 12 quickly (ignore the indicators flashing and the central locking activating).
the dashboard should be lighting up as normal.
Now turn the key to START

1994 Mazda 323 | Answered on Jul 01, 2017


Check the serpentine accessory drive belt and the drive belt pulleys for out of alignment issues. Also make sure the belt tensioner is functioning correctly.

1994 Mazda 323 | Answered on Apr 30, 2017


check that he hazard button has not been pressed as some mazdas use a direction indicator to flash and the hazard just connects all 4 lights to flash together

1994 Mazda 323 | Answered on Jan 30, 2017


is the engine management light on?

1994 Mazda 323 | Answered on Jan 11, 2017


firing order is 1-3-4-2

1994 Mazda 323 | Answered on Jan 09, 2017


check the fuel pump pressure on the fuel rail is tyre looking type valve ,connect a gauge to this and it should read 55lbs

1994 Mazda 323 | Answered on Aug 09, 2016


First thing to do is check to see if the brake lights work, if they don't there is no power to the park lock out solenoid and the vehicle will not come out of park.

1994 Mazda 323 | Answered on Jun 19, 2016


Brake switch, check and see if you have brake lights. If you have lights it is the wiring or solenoid at the shifter.

1994 Mazda 323 | Answered on Jun 18, 2016


you have a leak on your clutch master you need to replace probably the leak started small and now its worst

1994 Mazda 323 | Answered on Aug 25, 2015


if you want to disable remove the fuse if you want to enable check the fuse

1994 Mazda 323 | Answered on Aug 25, 2015


fuel pump

1994 Mazda 323 | Answered on Aug 25, 2015

Not finding what you are looking for?
1994 Mazda 323 Logo

501 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Mazda 323
1991 Mazda 323

126 Questions

1993 Mazda 323
1993 Mazda 323

85 Questions

1992 Mazda 323
1992 Mazda 323

70 Questions

1990 Mazda 323
1990 Mazda 323

61 Questions

2003 Mazda 323
2003 Mazda 323

23 Questions

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6571 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

323 Mazda

  • 323 Mazda

Most Popular Question

94 mazda 323 automatic transmission

  • Cars & Trucks
Loading...