20 Most Recent 1991 Mazda B-Series - Page 2 Questions & Answers

could be a few thing try the thermastate first

1991 Mazda... | Answered on Mar 25, 2012

This is an indication of a bad blower motor resistor. Replacing this should fix your issue.

1991 Mazda... | Answered on Jun 19, 2011

What motor....L 4-218cc 2.2L 2200 2-bbl
L4-218cc 2.2L 2200 MFI or L4-2606cc 2.6L SOHC ?????

1991 Mazda... | Answered on Jun 04, 2011

Not a solution but i am going through the exact same nightmare and same symptoms with my 1991 mazda b2200. I've apwnt over two grand to have my rebuilt TWICE and my alternator replaced and still does the same thing just starts only to die 2 seconds or so later unless i let it warm up to its max but will still die when taking turns and stopping at lights.

1991 Mazda... | Answered on Mar 29, 2011

can be the temp. censer

1991 Mazda... | Answered on Mar 26, 2011

sounds like ignition control module.

1991 Mazda... | Answered on Feb 20, 2011

Check the EGR valve..

EGR valve is bolted to the manifold on passenger side, just underneath the carburetor. There are three hex head screws, requires 10mm socket.

1991 Mazda... | Answered on Nov 18, 2010

thats the A.I.R. system check valves.

1991 Mazda... | Answered on Jul 24, 2010

if the alarm/immobiliser could be bypassed the thieves would have it away in no time....you will have to buy a new remote and have it coded to the car.....

1991 Mazda... | Answered on Jun 17, 2010

YES!!, you had it tuned, it runs good, but gas mileage dropped, and check engine light is on,it sounds like the o2 sensors are slow or even dead, i would replace them for sure and that just might solve all your problems,good luck, hope this helps.

1991 Mazda... | Answered on Apr 20, 2010

The only thing to do is get a diagram from the MAZDA dealer parts dept. "A few parts fell out" is way to vague to help you.

1991 Mazda... | Answered on Dec 30, 2009

If it's not a bad fuse which usually also controls the dome light. Then it is probably just a bad element available at any parts store

1991 Mazda... | Answered on Oct 15, 2009

Not finding what you are looking for?
1991 Mazda B-Series Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

B-Series Mazda

  • B-Series Mazda

Most Popular Question

bleed brakes 1991 mazda b2600i

  • Cars & Trucks