20 Most Recent 1997 Ford Econoline Questions & Answers


BBB Industries online under Technical

1997 Ford... | Answered on Aug 03, 2015


Did that trying to test for power there new resistor still no power...checked relay and fuse first

1997 Ford... | Answered on Jun 20, 2015


The button on the steering wheel may be stuck or the horn relay could be stuck in the closed position.

1997 Ford... | Answered on Feb 05, 2015


I'm not an auto mechanic but I would check. Axle/cv boot

1997 Ford... | Answered on Jun 29, 2014


Have a dealers parts dept run that number to find out

Take the part with you, to see it on the computer screen at
the parts dept

Parts Dept is a different door you go to, from outside the building

1997 Ford... | Answered on Jun 10, 2014


pinning ( detonation) is caused from a combination of air/fuel mixture octane rating and timing. IT is the spontaneous combustion ( without timed spark) and occurs when the air/fuel mixture is too lean and the mixture is fired by hot points in the combustion chamber Run fault codes to check for faulty o2 sensors /MAP/MAF sensors . Try a tank of higher rated octane fuel to see it that fixes the problem. If you are using an E mix fuel then it is not as good in some cars as claimed.

1997 Ford... | Answered on Jun 07, 2014


Raise the car and unbolt it...

1997 Ford... | Answered on Jun 05, 2014


Here is a solution that makes sense.


A code P0174 may mean that one or more of the following has happened:
The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of "oiled" air filters can cause the MAF to become dirty if the filter is over-oiled.

There is also an issue with some vehicles where the MAF sensors leak the silicone potting material used to protect the circuitry.

There could be a vacuum leak downstream of the MAF sensor.

Possible solutions include: In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling Inspect all vacuum and PCV hoses, replace if necessary Check for a dirty fuel filter and proper fuel pressure.



Read more at: http://www.obd-codes.com/p0174

1997 Ford... | Answered on Jun 03, 2014


Have 96 ef fairmont it wont start fuel pump wont switch on electric windows aren't working or the indicators everything else works. Theres no pwer to injectors or pulse.

1997 Ford... | Answered on Mar 27, 2014

Not finding what you are looking for?
1997 Ford Econoline Logo

306 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Econoline Ford

  • Econoline Ford

Most Popular Question

tell problem when get engine code p0174

  • Cars & Trucks
Loading...