20 Most Recent 2005 Mercedes-Benz Mercedes Benz CL500 - Page 3 Questions & Answers

What can I put in the tank to stop the leak from the abc it's not the pump history one on but I have a leak some were

The control module has set a fault and it will have to be reset. They are sensitive to voltage & must have 12 volts to operate properly.
The windows and top will need to be resync. I cannot find any information regarding the diagnostic procedure for the roof .. it states there is a procedure to diagnose the fault with the number of flashes the switch makes .. a dealer may be your best option on this fault .. I hope this helps some.

Hi.

There are many different faults that result in car turning over and not starting. Troubleshooting always starts from checking if problem is ignition/distribution, fuel, or something else. Check if there is spark and check if there is fuel pressure. Please tell us the codes resulting from OBDII scan done at Autozone, and tell us the model and year of the car.

Many thanks.

Ginko.

possibly leaking boot lock of faulty sensor in the boot lock check boot lock and if it's vacuum leaking or faulty sensor in the lock replace it. is this information helped you?

if you mean the fuses then ask at dealer for a copy ,when i get one in i will copy the paper fuse layout and save on computer .

17" diameter, 7.5" width.

The passenger side airbag on this car is what is called a "smart airbag system", the airbag is automatically turned off whenever a person weighing less than 50 lbs is in the seat front passenger seat, the seat has a built in weight sensor, the system runs all air bags off one control module so there is no way to disable the airbag without disabling the whole airbag system and this will cause a serious risk to u and the rest of the occupants of the car in a crash.

1st to do, drain all fluid from trans. ,remove oil pan and change strainer, reinstall the oil pan and fill with new trans fluid ,

Try serviceing the trany ( Change filter and fluid )