20 Most Recent
2004 Chevrolet Monte Carlo - Page 6 Questions & Answers
Diagram of Fuse Box
I suggest you to go on internet to find the diagram,before anything have a tester ready or other tools to check if the power arrives to each fuse!
Where is the pcv valve
PCV Valve is in one of the valve covers with a hose connected to it. Pull it straight out of the valve cover and remove it from the hose. Shake it to see if the valve moves back and forth. If not, replace.
Speed sensor
If you mean the speed sensor for the speedometer, there is an input and output for an LS model. You just need to know which one you need. Keep in mind, if they are using a trouble code to recommend a part, the part has to be tested first. Trouble codes do not tell you what to replace, just what to test.
I have a 2004 Monte
The turn signal switch assembly often causes this problem. If the hazard button is on your steering column it is part of the switch assembly and is called a multi-function switch . If it has a separate hazard button on the dash the can also cause the the same thing to happen. Try holding very slight pressure on the hazard button on the dash while the turn signal is on. If it starts working correctly replace only the the hazard switch. It is usually just snapped into the hole in the dash. If the hazard switch is on the column, than you should replace the multi-function switch. If it is equipped with an airbag, be sure the key is off while working on column. The multi-function switch should not require removal of the steering wheel on this car.
Not finding what you are looking for?