20 Most Recent
2000 Mercedes-Benz M-Class - Page 2 Questions & Answers
Ml430 multiple misfire code solution
With multiple mi sfires you need to see all the codes tor the person helping needs to see them. I would spend the money and buy a c/ode reader unless you have access to one. You can get a good onee for about $100 or less. This will let you diagnose the problem and if you can do some repairs save yourself thousand/s of dollars. The misfires can be caused by ignition ie plugs, coil packs, fuel or emissions. So knowin
6/26/2012 3:20:05 AM •
2000...
•
Answered
on Jun 26, 2012
MY ML 270 CDI COMAND DRAINS BATTERY
i think you will find the noise is the dvd player grinding away. if you have the remote trunk disconnect or at least take out te cart. the player in the mcs can be unplugged but requirs removing the mcs from the console tompull two plugs at the back.
5/8/2012 1:29:03 PM •
2000...
•
Answered
on May 08, 2012
How do you remove the starter on a 2000 Mercedes
Hi there, its very simple, first thing is first, remove the negative or ground cable from the battery, then, you need to get under your car, on the passenger side of under the engine you will see your starter, its held in by to inverted torx bolts (so you will need a special socket) remove the bolts and remove the 2 wires on teh back of the starter and reinstall in the reverse order
Happy Motoring!!!
9/27/2011 2:34:55 PM •
2000...
•
Answered
on Sep 27, 2011
Cant get the radio to
hi.
the dealers usually trace these codes through the registration number of the car. they also assume that the radio is the original and has not been changed in the last 11 years. you may have to take the radio itself to the dealer so they can check the serial numbers and make sure they have given you the correct code.
they should not charge you for this, if they did not give you the correct code in the first place.
6/26/2011 10:27:57 PM •
2000...
•
Answered
on Jun 26, 2011
Dear friends
I just bought a
- You have to have the radio on (even though it just says "wait") with the car running for 10 minutes and you get 3 attempts to enter the code. After 3 failures you have to wait 1 hour for an additional 3 tries at the code. To many code entry failures and it will go into PUK lock and you will have to call the manufacture to have them tell you how to unlock it.
Regards,
Tony
5/19/2011 1:49:21 AM •
2000...
•
Answered
on May 19, 2011
My rear tail gate latch
more likely than not the latch has closed some how if you have some one hold the the handle to open the tailgate you can open the latch by hand with a screw driver if your not sure what it should look like look at another door latch in the open position very simple to do and you cant hurt anything doing it this way
3/12/2011 8:58:41 PM •
2000...
•
Answered
on Mar 12, 2011
Not finding what you are looking for?