20 Most Recent
Questions & Answers
Central locking on w210
Can you please re-ask this questions?
First, you said the button Unlocks the Car and then say it Won't?
Second, The lock/unlock does not control the Courtesy lights, there is a Time delay but now here is the kicker....
Does the Courtesy lights come on when you use the FOB ?
If they do, they you have a problem with the Button or the Button Controller or a wire.
Third, I am not sure what Button you are talking about on the REAR HEAD RESTRAINTS? Are you talking Head Rests? I have never heard of as HEAD RESTRAINT
on Feb 28, 2020
My 2000 MBZ E320 when the gas tank down to 1/2
Im not sure what the reason is now im sure theres a post on here i think they have whats called a saddle bag fuel tank there shoukd be something in the tank that takes the fuel from 1 side to the other it looks like thats not working and thats why it comming up as empty on half a tank sorry coukdent be more help
on Feb 02, 2018
2000 Mercedes e320 with a frozen a/c compressor what size belt do I need to bypass?
There is no belt to do this, you must install a compressor bypass pulley also known as an "AC Delete" pulley. All cars come with the same belt with or without AC. Contact the dealer on this, but not sure they can help as AC is standard on US models unless you order it deleted, which of course no one does because of the wait time to have the car shipped from Europe due to the special order.
on Sep 07, 2016
I have a 2000 Mercedes E430 base sedan. Last week I replaced the brake light switch because it was out and it solved the problem to the point that I can now put my car into gear and drive it, however,
Brake light switch problem may cause the ESP / BAS lights to illuminate.
Common symptoms of a bad
Mercedes brake light switch.
- Car stuck in Park.
- ABS ESP ETS lights come on.
- Can not move the shifter from Park to Drive.
- Brakes Defective Warning on Instrument Cluster
- Car won't shift gears. Stuck in 2nd gear, limp mode.
- Brake lights don't work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)
- ESP, BAS, ABS lights turn on. Car won't shift properly. Stuck in gear.
: To test your new brake light switch: Turn you car off to reset the ABS light. apply the parking brake. and start the car in neutral or park without using the brake. if the problem is the brake light switch... the light will only come on when you press the brake pedal.
If you replaced the brake light switch and the light is still on you should check a few other things such as:
- Fuses and Relays
- ABS pump
- ABS wheel speed sensor
- Brake Fluid Level
- Get an advanced scanner to read trouble codes.
: ** You may need a MBZ scan tool to reset the error code which was stored in the ECU because of the bad brake light switch.
on Aug 18, 2016
c and they do go wrong so its a new lock only available from the dealers -ouch expensive- and dont forget to take your passport and vehicle papers with you as you cannot buy this part without ID
on Sep 02, 2014
Not finding what you are looking for?