2003 Mercedes-Benz E-Class - Page 6 - Answered Questions & Fixed issues


look inside the fuse box and tucked into it is a paper sheet with the fuse layout

2003... | Answered on Apr 25, 2010 | 150 views


change the oil

2003... | Answered on Feb 08, 2018 | 1,318 views


For a Mercedes,that's a DEALER fix.

2003... | Answered on Mar 27, 2010 | 472 views


electronic timing issue could be a stretched timing belt

2003... | Answered on Mar 27, 2010 | 49 views


Hi the steering pump uses a belt to drive it, when this gets stretched it will slip, oil can also get on the belt causing it to slip, so check the belt, make sure it is tight and free from oil, also make sure the power pump reservoir has oil at the same time

2003... | Answered on Mar 17, 2010 | 166 views


Need to find a vacuum hose leak and replace the hose. Look for the plastic hoses and the black rubber adaptors. Over year, these are cracking causing a leak hence there is a problem. When you put in gear, the engine carry a load but there is no engine compensation that is why it stalls. The engine only knows when it senses through the vacuum loop. Good luck.

2003... | Answered on Mar 14, 2010 | 146 views


not a solution, but exactly the same happened to me this morning. Boot motor jammed partly open and both number plate lights came up as not working on computer, very odd as all worked perfect yesterday. Did you fix yours? Thanks

2003... | Answered on Mar 07, 2010 | 123 views


i do not know but give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

2003... | Answered on Mar 06, 2010 | 139 views


if the dealer already changed one side and its fine i would go back and let them do the other side cuz then the parts and labor would be under warranty

2003... | Answered on Feb 28, 2010 | 1,046 views


Car has electronic ignition lock
Keys will not turn if battery is low/flat
Try jump/booster,or charge

2003... | Answered on Feb 17, 2010 | 188 views


Do not go to position two'
Start the car
scroll to temp
scroll to sub page and the proper subpage turns up.
scroll to confirm
reset

2003... | Answered on Feb 10, 2010 | 167 views


YES

2003... | Answered on Jan 22, 2010 | 23 views


Stereo system start for less than five minuted then alarm appear on screen PROD

2003... | Answered on Jan 15, 2010 | 424 views


The brake sensor does many jobs. It senses air in the brake lines, electrical problems with the anti lock system, any other systems associated with the brakes. Have your brake system bled and all systems checked before changing the sensors.

2003... | Answered on Jan 14, 2010 | 288 views


Go to link below and go down about 3 post there is a pic. of the fuse box locations.

http://www.mbworld.org/forums/c-class-w203/227982-fuse-box-map.html


Good Luck

2003... | Answered on Nov 15, 2009 | 1,427 views


Hi,

Erasing the error does not resolve the faulty component.

The transmission is protecting itself from further damage - you need to establish what codes are being stored in the transmission computer, when it goes into emergency (limp mode).

So, have the transmission computer scanned by your local Mercedes dealership, for the relevant codes and you will identify the actual faulty electrical components related to the transmission.

If no codes are stored, then it is likely you have a mechanical issue inside your transmission.

Only when you fix the fault, will you achieve a permanent solution.

Cheers,

2003... | Answered on Nov 12, 2009 | 274 views


you have to replace door lock completely , there is small plastic gear on electric motor which moves locking mechanism and seems that gear is broken, but it is not available as separate part.

2003... | Answered on Nov 03, 2009 | 1,625 views


most important is to deactivate SBC control unit with computer to start work, otherwise you can damage system, then to change pads for front is just 13mm spanner and for rear - T40 torx.

2003... | Answered on Oct 31, 2009 | 659 views


sounds like the engine management light u need a diagnostics test at the garage where they link ur car to a computer and can reset everything hope this is helpful have a nice day :)

2003... | Answered on Oct 13, 2009 | 358 views


What dose it do, as the radiator and all pipes have to be changed and was the convertor taken off the box when you took the box out of the other car and if so was it drained and was the bands checked out that the Forwards and reverse plus the correct oil to be used when filled.
1st jack up and put in Park can you turn the wheels NO,, good now select D can you turn the wheels now
Yes so the bands inside could be your problem.
Let me know how you go Ron

2003... | Answered on Oct 03, 2009 | 132 views

Not finding what you are looking for?
2003 Mercedes-Benz E-Class Logo

419 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

jalal

Level 2 Expert

178 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...