20 Most Recent
Questions & Answers
Want to service my 1998 clk compressor my self,
That is an A/C compressor? You will need to have the system drained by a technician first, as it is illegal to vent the refrigerant to atmosphere. Then you can go to work.
Personally I would not try though, just find a guaranteed 2nd hand one from a wrecker.
on Aug 24, 2013
how do i bleed the coolant system on my 2001 chey impala
on Jul 05, 2013
Replacing timing belt; need timing belt markings for 2000 mazda protege
If it has the twin camshafts, then you need to align the bottom crankshaft pulley marking (there's only one marking at top dead centre). Then you'll need to align the two camshaft pulleys. You need to use the first two sets of markings and then double check the markings on the camshafts themselves, within the valve cover area. Always double check the crank shaft sensor is aligned properly on re-assembly as misalignment will result in a non-start and you might doubt your own work. Don't worry about timing belt failure or misalignment on the twin cam engine as this is a "safe-engine" and will not result in any damage.
on Oct 30, 2012
Not finding what you are looking for?