20 Most Recent 2000 Chevrolet Impala Questions & Answers

0helpful
1answer

Need a diagram of brake lines on a 2000 impala non abs

2000 2005 Chevy Impala need break diagram lines running from master cylinder back down to the two bottom or the top run front or what
9/23/2022 8:37:26 PM • 2000 Chevrolet... • Answered on Sep 23, 2022
0helpful
3answers

Where is the orifice tube located on a 2000 impala

on the thin line near the evaporator were the two couplings are joined together
7/25/2022 3:05:59 AM • 2000 Chevrolet... • Answered on Jul 25, 2022
0helpful
1answer

I have a 2000 Impala 3.8 changed tps now it doesn't go below 4000rpm can you please help

need to do a relearn procedure https://www.youtube.com/watch?v=NAnEoMa80VY https://www.youtube.com/watch?v=VjF5xkh1nS4
6/5/2022 10:28:17 PM • 2000 Chevrolet... • Answered on Jun 05, 2022
0helpful
2answers

2000 Chevrolet Impala blower motor work from 1-4 but not on 5th speed why?

The blower motor relay is energized when the Blower Motor Control is set to the High position. This removes the blower motor resistors from the circuit and battery voltage is then applied directly from the HVAC BLO fuse (RH IP Accessory Wiring Junction Block) to the blower motor though the relay switch contacts. The blower motor then runs at high speed. HVAC Blower Controls Circuit Description The blower motor is a variable speed motor. The motor operates at a higher rate when voltage is increased to the maximum level. The blower motor resistors reduce the voltage supplied from the A/C FAN fuse (LH IP Accessory Wiring Junction Block) when the blower control is set at low and medium speeds (speeds 1-4). The blower motor relay is energized when the Blower Motor Control is set to the High position. This removes the blower motor resistors from the circuit and battery voltage is then applied directly from the HVAC BLO fuse (RH IP Accessory Wiring Junction Block) to the blower motor though the relay switch contacts. The blower motor then runs at high speed.
5/21/2022 7:53:51 AM • 2000 Chevrolet... • Answered on May 21, 2022
0helpful
1answer

2000 Chevy Impala. How to adjust high beams?

You can't use High Beams as dipped, the spread is different. Just go to another garage, it can only be the bulbs, the connection, the fuses or the relay. In fact you can check all those yourself! It appears to be a known issue on the Impala. Look at the videos https://www.google.com/search?q=2000+chevy+impala+headlight+problem

Fuse Box Diagram Chevrolet Impala (2000-2005)

https://fuse-box.info > chevrolet > chevrolet-impala-20... It is located on the passenger's side of the instrument panel, behind the cover. The location of the fuses in the passenger compartment: Chevrolet Impala (2000- ... ..
3/4/2022 11:10:33 PM • 2000 Chevrolet... • Answered on Mar 04, 2022
0helpful
1answer

2000 Chevy Impala problems

if no signs of leak around motor or floor then internal leak and burning it off --buy or borrow [auto parts stores ] a coolant pressure tester ---also pull and read plugs
9/23/2021 5:27:43 PM • 2000 Chevrolet... • Answered on Sep 23, 2021
0helpful
1answer

I have a 2000 chevy

yes if u buy ignition switch from the junk yard make sure they have it plug or u need to use the right key from the right ignition..
u cant use your own key sir u need the original key of the ignition switch where u took the parts.god bless
7/26/2021 6:29:09 PM • 2000 Chevrolet... • Answered on Jul 26, 2021
0helpful
1answer

How to fix a solenoid problem on a 2000 chevy impala transmission

replace it
5/20/2019 10:59:59 PM • 2000 Chevrolet... • Answered on May 20, 2019
0helpful
1answer

On the 2000 Chevy impala 3400. There is a small vacuum line coming from the back of the upper intake manifold. Where do that vacuum line go.

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals
2/26/2019 8:35:48 AM • 2000 Chevrolet... • Answered on Feb 26, 2019
0helpful
1answer

2ooo chevy impala no crank anti-thieft problem

Turn the key on and leave it on until the theft light blinks or goes off.It should start then.This could take 10 to 20 minutes.
4/9/2018 12:30:49 AM • 2000 Chevrolet... • Answered on Apr 09, 2018
0helpful
1answer

Location of the oil pressure switch on a 2000 chevy impala 3.8L

If you're finding it difficult to service/repair your car I know a website that has every info on all vehicles and vehicle problems, with their solution In detail.. it's www.reliable-store.com
3/9/2018 3:49:00 PM • 2000 Chevrolet... • Answered on Mar 09, 2018
0helpful
1answer

I have a 2000 impala

What engine does it have ? 3.4 or 3.8 L Turns over but wont catch ??? turns over but won't start an run !!!!!! What wire did you check for Ground ? Looking at a wiring diagram so you know which wire is what . Black/ white wire , pin K at the ICM - ignition control module . This is ground for ICM - ground point G-111 . Looking at service repair manual would tell you where this ground is located . G111 (VIN K) Top right of the engine, below the ignition control module. Suggest you watch this training video GM Bypass Ignition System Operation part 1
2/17/2018 3:48:19 PM • 2000 Chevrolet... • Answered on Feb 17, 2018
0helpful
2answers

2000 impala dome light stay on 15 min.after you shut car off and get out

your car has dimmer on the dash, you need to turn off. all cars have one.
2/2/2018 11:28:43 PM • 2000 Chevrolet... • Answered on Feb 02, 2018
0helpful
2answers

Spark plug gap for 2000 chevy impala

It is probably in the owner's manual under "Specs" RockAuto shows it as .060 on the 3.8. 2000 CHEVROLET IMPALA 3 8L V6 Spark Plug RockAuto
1/16/2018 3:39:19 AM • 2000 Chevrolet... • Answered on Jan 16, 2018
0helpful
1answer

2006 impala lt defroster does not blow sfficient

mode door in ducting either stuck or failed --try turning the selector to another setting like floor /dash then another to see if it changes if no change actuator may have failed
11/9/2017 2:36:29 PM • 2000 Chevrolet... • Answered on Nov 09, 2017
0helpful
1answer

2000 Chevy Impala smells like gas

Check under the hood on the side of the fuel rail, the fuel pressure regulator value, this is a common problem.
10/31/2017 4:33:01 AM • 2000 Chevrolet... • Answered on Oct 31, 2017
0helpful
1answer

2005 chevy impala holding high idle

A temp sensor out of range giving a false cold reading can cause high idle . A MAP sensor can also cause high idle by advancing the timing resulting in higher idle .
10/7/2017 11:13:54 PM • 2000 Chevrolet... • Answered on Oct 07, 2017
0helpful
1answer

We own a 2000 Impala. Recently the dome lights have stopped working. The lights on the mirror are the only ones that come on when the door is opened. Unless I have just overlooked it, I cannot find an

Possible wire damage if the bulb and socket are good . Also , the BCM controls the lights on this model according to the wiring diagram. Do the map lights work ?
9/20/2017 1:15:49 AM • 2000 Chevrolet... • Answered on Sep 20, 2017
0helpful
1answer

I have a 2000 Chevy impala with 131,500 miles on

catalytic converter, egr valve, oxygen sensors. If you have that many miles on it, try loosening the exhaust before the cat converter and try driving it. If your power has come back, then it has failed internally.
7/20/2017 7:19:09 AM • 2000 Chevrolet... • Answered on Jul 20, 2017
Not finding what you are looking for?

1,706 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8991 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Impala Chevrolet

  • Impala Chevrolet

Most Popular Question

2000 impala blower motor work from 1 4

  • Cars & Trucks
Loading...