20 Most Recent 1998 Dodge Intrepid - Page 5 Questions & Answers

both input and output speed sensor are located on the left side of the transaxle case. do not interchange input and the output sensor.

if follow the fuel rail from the injectors you can't miss it

check for a bad vacuum hose from engine to cowl area of vehicle

could be bad fuel pump

have you found a breather on top of gearbox if so pull it of and fill from there

Go to the dodge dealer and get him to print out a copy of the parts diagram... Also ask him what it is actually called while you are there.

Try putting a jumper wire from ground to the wiper motor. Simply touch the motor with a ground wire to test. If motor starts to move and run normally -that was issue. Now to fix -run a ground wire from wiper motor to firewall as a permanent fix - good clean connections are key.

It could be any number of things. Does it have fire on the back of coil? Does it have fire to the plugs? Have you hooked it up to find out the engine code history. On a computer controlled vehicle it could really "be anything". Find out what you can and I'll try to help as much as I can on the other end of a keyboard.

The chances are, you have a very loose conection some where in your wiring or the switch is faulty (replace this first) its the easiest to check by substitutionFinding a bad conection is a real pain and partly down to good luck The other thing to look for is the earth conections -- when you find them -- make sure that they have a good earth to the chasis (So clean them up and refit them)I Hope this works for you

Random engine misfire.

P0300 means the engine has a ramdom engine cylinder misfire. If the engine is running smooth then yoyu may need the computer flashed with a new program to repair this. Only the dealer can do this.

sometimes if the steering wheel turned too far when u turn it off turn turning the key and moving the steering at the same time also make sure it is in park