Top 10 1998 Dodge Durango Questions & Answers

1998 Dodge Durango Logo

Question

  • 2,221 People Helped

how to replace rear wiper arm 2004 toyota sienna

My windshield wiper arm snapped in two. I want to replace it, but don't know where to start.

Posted by on

Answer

  • Most Helpful of 1 Answers

YO CAN HAVE TWO DIFFERENTE KIND IF YOU GOT A CAP ON IT THAT MEEN THERE A NUT THAT HOLDING THE ARM IN PLACE IF ITS THAT BE CAREFULL WHEN YOU REMOVE THAT NUT ITS VERY LITTLE NUT HOLDING IT IN PLACE AFTER USE PLIERS TO REMOVE ARM 2ND IF YOU DONT HAVE A CAP THAT MEAN ITS PRESSURE FIT THAT THE WORST LIFT THE ARM UNDER THERE A METAL CLIP MOVE THE CLIP OUTSIDE ME I SUDJECT YOU TO CUT WITH A SAW THE SIDE OF OLD ARM USE PLIERS TO REMOVE OLD ARM CLEAN THE WIPER SHAFT THE SPLINE ON IT AND REINSTALL IT GOOD LUCK PIERRE

Posted on Jan 10, 2009

Question

  • 2,489 People Helped

how to replace a water pump on a 98 durango

how to replace a water pump on a 98 durango

Posted by on

Answer

  • Most Helpful of 1 Answers

0) url = inUrl tWindow = window.open(url, '_notes', 'toolbar=no,location=no,status=no,menubar=no, scrollbars=yes,resizable=yes,width=650,height=400') setTimeout('toolbarFocus()',500) } // --> "); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } function SizedForPrint(ImgName, ZoomPct, W, H, Target, Title, ImgMap, MapVar) { msg=window.open("",Target, "toolbar=yes,directories=no,scrollbars=yes,status=no,resizable=yes,menu=no"); msg.document.writeln(""); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } function SplitImagePiece(ImgName, ZoomPct, W, H, Target, Title, ImgMap, MapVar) { W = Math.floor(W * ZoomPct); H = Math.floor(H * ZoomPct); msg=window.open("",Target, "toolbar=yes,directories=no,scrollbars=yes,status=yes,resizable=yes,menubar=yes,location=yes"); msg.document.writeln(""); msg.document.writeln("" + Title + ""); msg.document.writeln(""); if (ImgMap == "NONE") { msg.document.writeln(""); } else { msg.document.writeln(MapVar); msg.document.writeln(""); } msg.document.writeln(""); msg.document.close(); setTimeout("msgFocus()",250); } // --> 1998 Dodge Truck Durango 4WD V8-5.2L VIN Y blnk_spc.gif REMOVAL
The water pump can be removed and installed without discharging the air conditioning system (if equipped).

  1. Disconnect battery negative cable.
  2. Drain cooling system. Refer to Cooling System-Draining and Filling.
  3. Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse. WARNING: Constant tension hose clamps are used on most cooling system hoses. When removing or installing, use only tools designed for servicing this type of clamp, such as special clamp tool (number 6094). snap-on clamp tool (number HPC-20) may be used for larger clamps. Always wear safety glasses when servicing constant tension clamps. CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only an original equipment clamp with matching number or letter.
  4. Remove upper radiator hose clamp and hose at radiator.
  5. The thermal viscous fan drive is attached (threaded) to the water pump hub shaft. Remove fan/viscous fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front. Threads on viscous fan drive: are RIGHT HAND. A Snap-On 36 MM Fan Wrench (number SP346 from Snap-On Cummins Diesel Tool Set number 2017DSP) can be used. Place a bar or screwdriver between water pump pulley bolts to prevent pulley from rotating. Do not attempt to remove fan/viscous fan drive assembly from vehicle at this time.
  6. If water pump is being replaced, do not unbolt fan blade assembly from thermal viscous
  7. Remove fan shroud attaching hardware (two bolts at bottom-two clips at top).
  8. Remove fan shroud and fan blade/viscous fan drive assembly from vehicle as a complete unit.
  9. After removing fan blade/viscous fan drive assembly, do not place thermal viscous fan drive in horizontal position. If stored horizontally, silicone fluid in viscous fan drive could drain into its bearing assembly and contaminate lubricant.
  10. Do not remove water pump pulley bolts at this time.
  11. Remove accessory drive belt as follows: The drive belt is equipped with a spring loaded automatic tensioner. Relax tension from belt by rotating tensioner clockwise (as viewed from front). When all belt tension has been relaxed, remove accessory drive belt.
  12. Remove four water pump pulley-to-water pump hub bolts and remove pulley from vehicle.






blnk_spc.gif _uacct = "UA-1870158-4"; urchinTracker();

Posted on Jun 30, 2009

Question

  • 1,818 People Helped

turn signals won't blink

I checked all of my turn signal bulbs and they are working. I checked my turn signal fuse and it's fine. When I signal a turn left or right, my turn signal light just stays on. Even when I turn on my hazard lights all of the lights come on but do not blink.

Posted by on

Answer

  • Most Helpful of 1 Answers

relay is bad turn signal relay

Posted on Jul 31, 2009

Question

  • 2,169 People Helped

Taillights not working on 1998 Dodge Durango

I replaced all the bulbs in the rear of my 1998 Dodge Durango. The brake lights, turn signals, and flashers all work, though the taillights do not. Is there a fuse that I am not finding which operates the taillights? The fuse box diagramdoes not specifically read "taillights". What should I do to resolve this problem?

Posted by on

Answer

  • Most Helpful of 1 Answers

tail lamps-undefined-undefined-0.jpg Check that fuse. Hope you can read it? See the A in lower left of diagram, that carries voltage to tail lamps. Black wire with yellow tracer. Check that wire for voltage, close to the headlamp switch. Headlamp switch in park position.

Posted on May 23, 2021

Question

  • 2,055 People Helped

99 dodge Durango security bypass key fob broke

my 99 Durango key fob broke and I can't open door or start the truck with out horn sounding and when I try to start it it stalls was woundering if there was any way to bypass this so I can atleast drive it to dealer to have a new key fob programed to my truck there must be a relay or something I could unplug please help stuck up north and need to get home thanks

Posted by on

Answer

  • Most Helpful of 1 Answers

Try unlocking the the door with the key and then lock and then unlock again the may disable the security system

Posted on Jan 31, 2010

Question

  • 2,755 People Helped

1998 DODGE DURANGO NO POWER TO COIL

1998 DODGE DURANGO NO POWER TO COIL

Posted by on

Answer

  • Most Helpful of 8 Answers

You Know Your only supposed to have voltage for about 2 seconds on coil dark green with a orange tracer. When you cycle key on there should be voltage for about 2 seconds and then shut off.

Posted on Feb 07, 2010

Question

  • 7,884 People Helped

firing order for dodge durango 1998 5.2 liter

firing order for dodge durango 1998 5.2 liter

Posted by on

Answer

  • Most Helpful of 2 Answers

For 1998 Dodge Durango 4WD 5.2 liter V-8 VIN "Y"...

285823d.gif


Hope this helped (remember coment and rated this).

Posted on Apr 05, 2010

Question

  • 1,929 People Helped

what is code PO748

what is code PO748

Posted by on

Answer

  • Most Helpful of 1 Answers

Here you can find DTC P0748 PRESSURE CONTROL SOLENOID (LINE PRESSURE DUTY SOLENOID) ELECTRICAL

Hope helps.

Posted on Jun 12, 2010

Question

  • 3,190 People Helped

wiring for 1998 dodge durango car stereo

wiring for 1998 dodge durango car stereo

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi there:Check this on 1998 Dodge Durango Car Audio Wiring Diagram:

Car Radio Battery Constant 12v+ Wire: Red/BlueCar Radio Accessory Switched 12v+ Wire: Red/WhiteCar Radio Ground Wire: N/ACar Radio Illumination Wire: Black/YellowCar Stereo Dimmer Wire: OrangeCar Stereo Antenna Trigger Wire: N/ACar Stereo Amp Trigger Wire: GreenCar Stereo Amplifier Location: N/ACar Audio Front Speakers Size: 6 1/2" SpeakersCar Audio Front Speakers Location: DoorsLeft Front Speaker Positive Wire (+): Dark GreenLeft Front Speaker Negative Wire (-): Brown/RedRight Front Speaker Positive Wire (+): Brown/YellowRight Front Speaker Negative Wire (-): Brown/Light BlueCar Audio Rear Speakers Size: 6 1/2" SpeakersCar Audio Rear Speakers Location: Rear DoorsLeft Rear Speaker Positive Wire (+): WhiteLeft Rear Speaker Negative Wire (-): Dark Blue/RedRight Rear Speaker Positive Wire (+): Brown/WhiteRight Rear Speaker Negative Wire (-): Brown/Orange
Hope helps.

Posted on Mar 12, 2012

Question

  • 2,261 People Helped

how to replace oil pump on durango

how to replace oil pump

Posted by on

Answer

  • Most Helpful of 1 Answers

Dodge Ram Oil Pump Replacement


click on link

Posted on Mar 17, 2015

893 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2001 Dodge Durango
2001 Dodge Durango

1,378 Questions

2002 Dodge Durango
2002 Dodge Durango

886 Questions

2004 Dodge Durango
2004 Dodge Durango

1,005 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

1998 Dodge Durango Durango

  • 1998 Dodge Durango Durango

Most Popular Question

give me list interchangeable vehicles

  • Cars & Trucks
Loading...