20 Most Recent 2002 Mitsubishi Lancer - Page 7 Questions & Answers

I would have a quick inspection of the brake lines, to see for a squished or bent line. If lines look good then it rilly only leaves the ABS unit (big square aloy block with lots of hoses coming out of it) unless the master brake cylinder is separated.

2002 Mitsubishi... | Answered on May 07, 2014

Internal failure in speedometer cluster.

2002 Mitsubishi... | Answered on May 04, 2014

check wheel bearings for condition and adjustment. Check front end suspension for wear . Check steering ball joints for wear.

2002 Mitsubishi... | Answered on May 04, 2014

check speedo sensor in the transmission

2002 Mitsubishi... | Answered on May 01, 2014

It doesn't matter. But usually the left side of the cooler lines go with the left side of the radiator. Cooler lines run both ways, unless you deal with Dodge, stupid check valves. I take them out....

2002 Mitsubishi... | Answered on Apr 30, 2014

You mean check engine light? If so, the P0456 code is an emmisions leak code. You will need to take the vehicle to a qualified repair facility and have them run an emmisions leakage test on it.

2002 Mitsubishi... | Answered on Apr 28, 2014

Not without plugging it in and seeing what codes pop up ,as for the door locks then try disconnecting the battery leaving for a few hours then trying again ,failing which try unlocking and locking the door three times and see if this will reset it

2002 Mitsubishi... | Answered on Apr 27, 2014

Hi Phatpratt, Sounds to me as if you have damaged the starter soloniod and maybe the Bendix. The problem with short cuts is that they most times take you longer than going the long way around! The way to deal with contaminated fuel is to drop the tank, clean the fuel lines and rail and then replace the fuel filter. Regards John

2002 Mitsubishi... | Answered on Apr 24, 2014

Hello. Pull the fuse out for the horn. See if you can open the steering wheel cover to see if the horn button is bad or not. If it is bad, go to a well known jankyard that have good conditioned items and look for the same kind of a car as yours and look for another horn button that is in mint or in a very good conditin.

2002 Mitsubishi... | Answered on Apr 21, 2014

When the compression is at it's peak at idle the cylinder pressure prevents the spark from occurring because of the high resistance caused across the plug gap. IT there is a problem in the carbon tracked leads and connections then the spark fails and the plugs misfire . So change the leads out for some good quality leads . Next check the injectors as they will also cause random misfire if they are dirty and squirting and not spraying

2002 Mitsubishi... | Answered on Apr 13, 2014

make sure shifter all the way in park,turn steering wheel back and forth while turning key to lock and remove key, if this works the ignition lock linkage is probably worn and needs replaced

2002 Mitsubishi... | Answered on Apr 08, 2014

Most parts store will scan the problem for free.

2002 Mitsubishi... | Answered on Apr 08, 2014

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

1,447 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lancer Mitsubishi

  • Lancer Mitsubishi

Most Popular Question

friend mines 2002 lancer pr car 4

  • Cars & Trucks