20 Most Recent 1991 Mitsubishi Mighty Max - Page 3 Questions & Answers

Check the oil pressure with a mechanical test gauge and it will likely be ok, if so replace the oil pressure sending unit. Do not use any oil thickener in this engine it can damage the bearings.

necesito la imagen de la bobina de ignicion

SOUNDS TA ME LIKE UR CADELITICE CONVURTER IS CLOGED UP...TAKE IT OFF AND HOLLOW OUT WIT A LONG SCWER DRIVER AND JAM IT DOWN THROW WHAT COMES OUT WILL B HONEYCUMB IN SHAPE SHAKE REMAINING PEICES OUT AND PUT BACK ON...IV HAD THE SAME PROBLEM IN THE PAST AND THIS HAS WORK FOR ME

thanks for using FixYa.

you may have a blown fuse check the fuse box to see if any are blown,you may find that HIGH & LOW beam lights are on separate fuses.....hope this helps.......cheers.

look behind e-brake. there is a small switch there. so when applying e-brake it comes on dash to let you know the brake is on. it may need adjusting or is just loose. adjust it in so it does not hit e-brake arm when off. good-day !

with it being an older vehicle with high milage a 10w40 oil would be my suggestion.

Best to start with driving, then check for spark and fuel/ fuel pressure. Let me know