2006 Chevrolet Express - Answered Questions & Fixed issues

Thee is no glove box in a 2006 chevy express 2500. There is also no in cabin air filter.

2006 Chevrolet... • Answered on Jun 04, 2020 • 4,359 views

If it will not hit with spraying starting fluid, that indicates that you have a no fire condition. Start at the spark plugs and work your way in from there. Wires, coil, crank trigger, fuse.

2006 Chevrolet... • Answered on Jan 23, 2019 • 28 views

Hi there, I'm not sure if you're still looking, but I found your car's obd if you're still looking for it: http://bit.ly/16kzNAF

2006 Chevrolet... • Answered on Aug 05, 2017 • 2,463 views

Yes, it is a mechanical oil pump. Just for peace of mind, you could have the oil pressure checked. A mechanic shop could do it real easy-you remove the oil pressure sensor or sending unit from the engine block and hook up a "mechanical oil pressure gauge", then run the engine with gauge attached and check pressure against the specs for your model- it is a specified pressure at a specified engine rpm. I f oil pressure is within specs, I can't imagine anything else about the pump that could cause that noise. It is a compact unit with a couple of heavy internal gears. If your mechanic didn't think it was a bearing or rod either, you should be safe there. He would know the sound of a rod bearing or mechanical problem like that, and if it is different from your sound. Beyond that and the oil pump, I just don't have any ideas. Hope you find it, good luck.

2006 Chevrolet... • Answered on Mar 14, 2017 • 116 views

My air pressure is low in 2003 Chevy express 3500 , I change the blower motor and still have the same problem ....the ones on the passenger side blows a little harder then the driver side I ready need to fix this problem cause it is hot in Texas

2006 Chevrolet... • Answered on Sep 15, 2016 • 3,464 views

Did you check for voltage at the applicable fuse/s? Use a testlight and check for voltage at the fuse circuit with key on. The gauges usually get voltage feed from the ignition switch, key on. I haven't looked at your wiring yet, you may have to check feed to and from ignition switch. Found these two fuses for instrument cluster. One is hot all the time, the other goes hot with the key on. If voltage and ground for the instrument cluster are good, something else is wrong. 25939255-aw4244eavmgugprjy2o5d2ts-1-0.jpg

2006 Chevrolet... • Answered on Nov 03, 2015 • 123 views

low on freon

2006 Chevrolet... • Answered on Apr 23, 2015 • 28 views

you should have a tag label on the engine compartment

2006 Chevrolet... • Answered on Apr 23, 2015 • 40 views

bad gasoline

2006 Chevrolet... • Answered on Apr 23, 2015 • 61 views

gauge light means there is a gauge that is not working

2006 Chevrolet... • Answered on Apr 23, 2015 • 83 views

it goes Cab of truck 8 7 6 5 4 3 2 1 Fan (front of truck) For the V8 So, I would guess from this the drivers side would be odd bank, or would that make to much sense? Hopefully this helps!

2006 Chevrolet... • Answered on Apr 23, 2015 • 189 views

The fuse should be tuked up under the dash on the drivers side fuse panel. marked cig or pw+

2006 Chevrolet... • Answered on May 18, 2014 • 482 views

Check TPS sensor[RPM]

2006 Chevrolet... • Answered on May 15, 2014 • 30 views

the no power is a mode called "LIMP" this the ECM sets if there is a major fault in one or many of the engines sensors, to find what one your gonna have to visit one with a "code reader" this includes the "dealer" or a national auto parts chain store some of those even read the code for free just for the chance to sell you the sensor , this reminds me of one i had a year or so ago a guy that work with me parked his pick up under a tree and the next day it would start but ran terrible , turns out a animal that lived in the tree ate the wires under the hood overnite

2006 Chevrolet... • Answered on Apr 30, 2014 • 86 views

Do you have power at the horn relay and at the steering wheel ?

2006 Chevrolet... • Answered on Jan 21, 2014 • 31 views

ECM may require a CKP relearn. Use of scanner required.

2006 Chevrolet... • Answered on Jan 08, 2014 • 235 views

Make sure you have the correct oil in it, and the correct amount.

2006 Chevrolet... • Answered on Dec 21, 2013 • 76 views

It is possible that your coolant temp sensor could be faulty or the wiring.

2006 Chevrolet... • Answered on Sep 29, 2013 • 629 views

Check the mode door actuator.

2006 Chevrolet... • Answered on Sep 18, 2013 • 170 views

Not finding what you are looking for?
2006 Chevrolet Express Logo

207 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

john h

Level 3 Expert

24055 Answers

Ryan Lutton
Ryan Lutton

Level 3 Expert

1266 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14874 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides