20 Most Recent 2001 Oldsmobile Silhouette Questions & Answers

The EGR is mounted to the intake manifold--look in the right rear area behind the throttle body mechanism. There are two 10mm nuts, as well as a 10mm clamp screw holding it down. Remove the clamp screw first, then remove the two 10 mm nuts. You should first remove the intake air hose between the air filter and the throttle body, then remove the two front engine mounts, then using a ratchet strap, pull the top of the engine forward until it contacts the radiator fans. This will give enough room the reach the EGR valve and the exhaust pipe beneath it.

2001 Oldsmobile... | Answered on Nov 02, 2019

Most likely a rubber bushing......If it is leaking from the tube........it may be to full of fluid......ATF level is checked with engine running at operating temp.....Should be in the hash marks on the dip stick..........

2001 Oldsmobile... | Answered on Apr 22, 2019

Depending on the vehicle you could have 2 different units most suvs and vans use a front and rear u it.

2001 Oldsmobile... | Answered on Feb 06, 2018

If you know how the brakes work, then you would know that brake application involves brake pads coming in contact with rotors, and it is due to this the car comes to a stop. There are several reasons due to which you could be hearing noise from your brakes. We discuss them all in this article and let you know how to stop them.

Read more : Why do brakes make noise and How to stop it AutoPortal

brahe noise-0s2cyaov4igmhrfkxw4vdbod-5-0_0.jpg

2001 Oldsmobile... | Answered on Jan 08, 2018

The CLU is the compressor clutch - sounds like there may be shorted wiring in the clutch coil, causing it to draw too much current.

2001 Oldsmobile... | Answered on Oct 02, 2017


2001 Oldsmobile... | Answered on Aug 17, 2017

is the light setup one ballast for high and low beam ? if so the ballast has gone, probably even the bulbs. replace the ballast and bulbs. some aftermarket ballasts don't last, if you cannot find the right ballast for replacement you will need to replace both ballasts. as every ballast set are set the same and sold in pairs.

2001 Oldsmobile... | Answered on Jun 01, 2017

most likely just water vapor from the heat of the cab interior cooling on the evaporator coils
just like you smoke from your breath on cold mornings

2001 Oldsmobile... | Answered on Apr 10, 2017

Really you need to tell us what the problem is with the vehicle, but here is some information to get you started.

2001 Oldsmobile silhouette troubleshooting Google Search

2001 Oldsmobile... | Answered on Nov 29, 2016

Not finding what you are looking for?
2001 Oldsmobile Silhouette Logo

609 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Silhouette Oldsmobile

  • Silhouette Oldsmobile

Most Popular Question

2001 oldsmobile silhouette

  • Cars & Trucks