Ford escape transmission removal procedure
You'll need Hydraulic Floor Jack, Jack Stands, Wrench Set, Socket Set with extensions, Screwdrivers, Pliers, HAmemr, Pry bar, Fluid Drain Pan, Light, Rags, Containers to organize nuts and bolts, and possibly an assistant to help you out.
Then follow these steps:
1. Disconnect the negative battery cable
2. remove the black plastic air intake to create some room
3. Remove the transmission fluid dipstick and if possible the dipstick tube
4. Remove all brackets, hoses or cables that connect the engine and transmission
5. Locate starter motor and remove easily accessible starter bolts
6. Remove any of the top bell housing to accessible engine bolts
7. Chock rear wheel to raise the front of the vehicle
8. Drain all transmission fluid
9. Put the oil pan back in its position but only tighten the nuts by hand
10. Remove the driveshaft by removing the 4 U-joint bolts that hold the driveshaft to the rear differential
11. Disconnect all electrical connectors and hoses
12. Detach the oil cooler liens of the transmission
13. Remove the starter bolts
14. Remove the torque converter for the flywheel bolts
15. Remove all the bolts and nuts that are holding back the transmission mount
16. Remove the cross member
17. Remove the exhaust crossover pipe
18. Remove the transmission bell housing bolts
19. Now remove transmission from the engine and bring it down to the floor by removing the remaining bell housing bolts.
20. Lastly, remove the torque converter from the transmission
To know more in detail, please refer to this video: https://www.youtube.com/watch?v=t7PVog9gD2o
10/12/2021 6:21:27 PM •
2006 Ford Escape
•
Answered
on Oct 12, 2021
•
25,985 views