2006 Mitsubishi Raider - Answered Questions & Fixed issues

Question edited for clarity. Question moved to model category. Error code P0700 signifies that a malfunction has been detected in your vehicle's transmission controls. Most modern automobiles feature a specific control module as it relates to the vehicle's automatic transmission. This module is known as the Transmission Control Module (TCM).

p0700 Code - Transmission Control System (MIL Request) ' KBB

Kelley Blue Book https://www.kbb.com > obd-ii > p0700 ..

Try cycling the key in the driver door lock several times. This usually shuts off the alarm/immobilizer

Hello u'd need a proper manual for this in my opinion like there are plenty of dealers and online shops that deal in those.. you can get some free at reliable-store and it;s actually really illustrative

Yes I believe that the pcm controlls both usually it's a sensor issue or wiring issue. We never had many issues with them short of mice damage.

The best way to adjust the lights on your vehicle is to bring it to a body shop. There are two reasons. 1. they have to align headlights all the time after front collision damage so they are typically very good at it and have the tools/equipment to do it right. 2. there labor rate is typical half the price of a mechanical shop. If they need to be adjusted take my advice and leave it to the pros to get it done correctly. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Do you have fire across the coil plug. You can check it the same way you check the injector plug.

Could be a bad plug wire, a coilpack, or injector/injector wire.

My MITSUBISHI RAIDER IS NO GOING IN REVERSE WHILE IN REVERSE SHIFT Is in GEAR

It's in the transmission. The valve body. Yes

Begin with the basics........ Check engine lamp illuminated ?? Scan,code(s) stored ?? If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce

open the hood,remove wipers, remove black plastic cover , pollen filter is in front of you, just unclip it

remove fat knees. (joking, LOL)squeaks inside car or outside?inside, remove plastic shields, from columnstill squeak. ?

my 2000 chevy malibu shakes while im driving over 40 mp

Do you mean the battery that cranks the generator engine ?

google those codes and you'll probably see what they are.

prob shorted out coil remove and blow off wits air

Go to www.automecanico.com or www.autoelectronico.com this web is spanish, however you can translate with your web browser,i strong recommend you by your powerful information update for any models, cars. Try it and fix it. Go ahead.God bless you

check your dimmer switch if no avail its your radio

I had the same problem. Bad design. The best way to open it is to use lots of force in an upward motion on the release button while holding the lid down. I stopped shutting mine all the way to avoid having to do this. If yours is like mine, you can close it to the point just before it latches, and it will stay shut.

You have a strange problem, but I think it is not a serious one. In fact, from what you said it sounds like a contact corrosion problem or a starter relay problem or your vehicle is not sensing the key chip.

Where you say removing the starter fuse and reinserting it repairs the problem for a short time, I feel it is probably contact corrosion on the fuse box connections.