20 Most Recent 2005 Mazda 3 Questions & Answers

I have the wiring from two front ends of a Mazda 3 that are different. I'm looking for the diagram to match the good car. There are 3 connections. What info do you need?

2005 Mazda 3 | Answered on Feb 16, 2019

check the air filter today, could be the issue.

2005 Mazda 3 | Answered on Jan 01, 2018

I think that the drivers motor is on a separate fuse to the others because you can still make the drivers window go down after you turn off the ignition. Check the fuses.

2005 Mazda 3 | Answered on Aug 28, 2017

The clutch is hydraulic, you need to replace the slave and master cylinder.

2005 Mazda 3 | Answered on May 01, 2017

On this website, you find fuse box diagram and description for Mazda 3 (2005)

Mazda 3 2004 2005 fuse box diagram Auto Genius

2005 Mazda 3 | Answered on Apr 17, 2017

it turns out that you can install your own code and remove or change it
so i have removed the previous and installed my own

2005 Mazda 3 | Answered on Apr 15, 2017

first step is to have the fault codes read so that you have an idea of what is wrong
next is to have the transmission oil changed as dirty oil will cause that sort of fault
find an accredited service center with mazda experience or go to an accredited automatic shop for a service f the transmission
it will be servo/solenoids or oil problems

2005 Mazda 3 | Answered on Mar 27, 2017

undo the tyres
take the caliper off
need to rewind the piston on caliper back.
need a tool to rewind back the piston
change pads and refit

2005 Mazda 3 | Answered on Aug 09, 2016

check stabiliser links

2005 Mazda 3 | Answered on Aug 09, 2016

Could be the speedometer, or the speed sensor in the transmission.
Is the check engine light staying on ?
If it is, you should have the computer scanned for trouble codes. You may find a code for the sensor.

2005 Mazda 3 | Answered on May 30, 2016

I had same problem with Nissan 4x4 took it done to auto elec he couldn,t find the short so he put in a resetting fuse so if it happened sometimes it would not blow fuse but reset, but that made no sense so after a month I worked out what was causing it.The alternator had a bear wire in side that touched other wires when driving over bumps so it was shorting out ignition and petrol pump fuse, so got another alternator from the wreakers and it never happened again apparently its common. seaya Neil

2005 Mazda 3 | Answered on May 13, 2016

Possible bad connection on the battery?

2005 Mazda 3 | Answered on Mar 19, 2016

Not finding what you are looking for?
2005 Mazda 3 Logo

553 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 3
2004 Mazda 3

452 Questions

2006 Mazda 3
2006 Mazda 3

361 Questions

2007 Mazda 3
2007 Mazda 3

153 Questions

2009 Mazda MAZDA3
2009 Mazda MAZDA3

29 Questions

2010 Mazda MAZDA3
2010 Mazda MAZDA3

18 Questions

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MAZDA3 Mazda

  • MAZDA3 Mazda

Most Popular Question

2 3 motor 3 prong crank sensor put

  • Cars & Trucks