20 Most Recent 2006 Pontiac G6 Questions & Answers

0helpful
3answers

P0758 shift solenoid

solenoid in inside the transmission side cover. You must drop the engine cradle and lower transmission about 8-10 inch's to remove. just did one yesterday took about 4 hr .
9/26/2021 12:55:12 AM • 2006 Pontiac G6 • Answered on Sep 26, 2021
0helpful
1answer

How to reset pontiac g6 computer

The battery cable trick is the oldest shitiest trick in the book it solves nothing but delaying a problem and erasing the ck engine light.... I've been up and down the Pontiac G6 from no start no crank issues to climate control to pc problems these cars have way to many issues that should have been recalled of course the reason these things weren't recalled is bc GM would owe some of you guys a new car. I can help with about any G6 problem but some things aren't worth fixing
9/14/2021 8:01:32 AM • 2006 Pontiac G6 • Answered on Sep 14, 2021
0helpful
2answers

Warning chime sounds but no lights or messages visible

may happen when the system senses some weight on the passenger seat (dog, etc) or the weight switch is faulty/stuck. You can verify if this is the reason if the passenger airbag notice light shows ON.
8/14/2021 2:08:41 AM • 2006 Pontiac G6 • Answered on Aug 14, 2021
0helpful
2answers

Trunk release fuse on g 6

You might want to read the article at the link below. It might save you some time and trouble if you are trying to figure out a problem with your trunk release system.Where's The Fuse?Then, to answer the question you asked, the trunk release circuit is protected by the "TRUNK" fuse. It is Fuse #22 (10 Amp) located in the Rear Fuse Block in the left side of the rear compartment, behind the left rear wheel well.
8/8/2021 7:32:42 PM • 2006 Pontiac G6 • Answered on Aug 08, 2021
0helpful
2answers

2006 Pontiac G6 - loud clicking in HVAC system

Sound like something has fallen into the motor (small tree branch,pencil,etc. Remove heater motor .Be carfull.You might find something unexpected!
7/16/2021 8:18:05 PM • 2006 Pontiac G6 • Answered on Jul 16, 2021
0helpful
1answer

Torque specs on hub assembly nut on 2008 pontia g6

What are the torque specs caliper bracket bolts and pins and axle bolt pontiac g6 2008
1/13/2021 10:14:33 PM • 2006 Pontiac G6 • Answered on Jan 13, 2021
0helpful
2answers

Where is the location of the gps on a pontiac g6

depends on what radio you have if it is fitted to the radio. some are others there is a compartment near to the radio that is for the gps. you will find it by looking were the signal line is on the window or roof depending on model.
11/16/2020 5:12:07 PM • 2006 Pontiac G6 • Answered on Nov 16, 2020
0helpful
1answer

Anti theft 06 Pontiac g6 how to reset

It seems like you need to reprogram your key, and this is how you can do it: 1. Sit in your car and ensure all doors are closed 2. Put the key into the ignition while holding the lock button on the driver's door 3. Turn the G6 key in your ignition from "On" to "Off" while holding the "Lock" button, and do two more cycles of "On" and "Off" in quick succession. 4. Release the ock button and press and hold the lock button on the remote for 15 seconds 5. Now, remove the key from the ignition, and it should be programmed, and anti-theft mode would be put to rest
5/20/2020 3:47:56 PM • 2006 Pontiac G6 • Answered on May 20, 2020
0helpful
2answers

What is causing my vehicle to not start, theft? How do i fix this.

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Best Manuals
12/24/2019 1:43:26 PM • 2006 Pontiac G6 • Answered on Dec 24, 2019
0helpful
4answers

Heater core removal in a 2006 pontiac G6 3.9

This is a full day job with about 25 steps. Nobody is going to sit here and type it all out for you. This is where you really need a shop manual with diagrams and torque specs. Check with your public library to see if they have one for free online. Don't do this job without a manual and diagrams.
12/3/2019 6:10:00 PM • 2006 Pontiac G6 • Answered on Dec 03, 2019
0helpful
1answer

What tools do I need or can you recommend a reasonably priced ball joint tool kit to replace a ball joint on my 4 cylinder 2006 pontiac G6?

Well some auto part place will allow you to use the tools. You have to pay a deposit which is usually the price of the tool but when you bring the tool back they will give you the money back. Just for the heck of it I pulled up ball joint for 06 Pontiac G6 and it gave me replacement part lower control arm. https://www.youtube.com/watch?v=D-SoyYCz0qw https://www.youtube.com/watch?v=gjQxxUcXRLo https://www.youtube.com/watch?v=E9O_cOB2MTI The link below refers to the control arm needs to be replaced. https://www.g6ownersclub.com/forum/12-problems-solutions/9736-has-anyone-replaced-front-lower-control-arm.html https://www.g6ownersclub.com/forum/13-general-maintenance/34218-worn-ball-joints.html
8/25/2019 3:44:36 PM • 2006 Pontiac G6 • Answered on Aug 25, 2019
0helpful
1answer

My 2006 pontiac g6 wont start due to the passenger airbag module getting wet once or is something else not letting the car start?

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals
8/17/2019 4:17:08 AM • 2006 Pontiac G6 • Answered on Aug 17, 2019
0helpful
1answer

How do I check the transmission fluid on my 2006 Pontiac G6 2.4 litre engine.?

you may have a sealed trans (no stick) I think u would have a dash light if it were low. U would just follow dealer maint. about servicing it. Google it to double ck
6/21/2019 9:59:50 PM • 2006 Pontiac G6 • Answered on Jun 21, 2019
0helpful
1answer
0helpful
1answer

Location of TCM 2006 Pontiac G6

The TCM and PCM are the same unit. watch the video.
6/14/2019 1:20:21 AM • 2006 Pontiac G6 • Answered on Jun 14, 2019
0helpful
2answers

I have a 2006 Pontiac g6. The rear fuse box is in the trunk and is causing the car to die at times and when I move the box a little or turn it, it starts and runs fine til a little driving and it does it a few times a day. Help!

this problem its easy to repair you have cold solder or a faulty wire connectors and with a light tester you may find what its causing dead engine
4/26/2019 11:27:08 PM • 2006 Pontiac G6 • Answered on Apr 26, 2019
0helpful
1answer
0helpful
1answer

Were is the BCM located

dak408_45.gif
LOCATION IS RIGHT SIDE CENTER CONSOLE


BODY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
  1. Disconnect the negative battery cable.
  2. Remove the right console trim panel.
  3. Remove the body control module (BCM) screws.
  4. Remove the BCM wire harness connectors.
  5. dak408_46.gif

  1. Install the BCM.
  2. Install the BCM wire harness connectors.
  3. Install the BCM screws. NOTE: Refer to Fastener Notice in Service Precautions. Tighten the screws to 2.5 N.m (22 lb in) .
  4. Install the right console trim panel.
  5. Connect the negative battery cable.
2/17/2019 4:05:57 AM • 2006 Pontiac G6 • Answered on Feb 17, 2019
Not finding what you are looking for?
2006 Pontiac G6 Logo

2,019 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14998 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

G6 Pontiac

  • G6 Pontiac

Most Popular Question

key fob transmitter located in pont g6

  • Cars & Trucks
Loading...