20 Most Recent 2006 Mazda Tribute - Page 2 Questions & Answers

It may just be a coil breaking down or a bad spark plug. Try swapping one of the coils over with the faulty one and see if the misfire happens on that cylinder and cylinder 2 runs fine. If it does then swap the faulty one for a new coil. Don't know about your car but most now have individual coils for each cylinder that fit directly onto each spark plug.

2006 Mazda... | Answered on Aug 17, 2015

Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

2006 Mazda... | Answered on May 31, 2015

Most likely, your inertia switch has been tripped, either due to an accident or a sudden jolt to the vehicle.

2006 Mazda... | Answered on May 14, 2015

  • fuel rail pressure sensor could be the pressure regulator on the fuel rail a big vacuum leak

2006 Mazda... | Answered on Mar 26, 2015

ABS does not say differential that will be the brakes

2006 Mazda... | Answered on Feb 28, 2015

Check the glove box light,make sure it goes off when closed.

2006 Mazda... | Answered on Feb 20, 2015

Hi Allen,

It is located behind the power steering reservoir. Attached a video to show you how to access it.

Good luck.

2006 Mazda... | Answered on Feb 07, 2015

Send to a good engine machine shop for repair spares hole bores

2006 Mazda... | Answered on Dec 26, 2014

May have spilt some oil on the exhaust manifold should burn off in a short time if not check for a oil leak around the exhaust.

2006 Mazda... | Answered on Dec 26, 2014

Did you check for OBD Codes?

Did you have a shop drive it with scanner,
& see if all the Emission Monitors have run?

Ever do any Preventative Maintenance, or just
drive your vehicles until you have problems !

Did you check for fuel pressure at the motor & spark ?

Battery Dead or worn out !

No one can guess at your vehicle issues-- without it-- to
do some testing,always been that way

2006 Mazda... | Answered on Sep 21, 2014

Check for short - check brake light bulb socket.

Master Tech Lee

2006 Mazda... | Answered on Sep 03, 2014

Because you have yet to get yourself a wiring
diagram & do the required testing to find a problem

You find a problem first--you have a symptom only

Why would you replace a fuse more than once?

Like watching them go up in smoke & cost you money

2006 Mazda... | Answered on Jul 21, 2014

more information wanted before you can get a answer to this question as there are a lot of reasons it can be.

2006 Mazda... | Answered on Jul 05, 2014

disconnect the battery for 1hr or so

2006 Mazda... | Answered on May 17, 2014

Not finding what you are looking for?
2006 Mazda Tribute Logo

275 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tribute Mazda

  • Tribute Mazda

Most Popular Question

missfire cylinder 2

  • Cars & Trucks